Manufacturing > Manufacturing Process > Process Information > Examples: Creating a Customized Report on a Manufacturing Process
  
Examples: Creating a Customized Report on a Manufacturing Process
Example 1: Tool Listing
To produce the tool listing for a manufacturing model, define your repeat regions as shown in the following illustration (enter report symbols into cells as shown).
1. Outer region
2. Inner region
3. TOOL LISTING for &asm.name
4. OPERATION
5. MACHINE
6. TOOL
7. COMMENT
8. POCKET #
9. mfg.oper.name
10. mfg.oper.workcell.name
11. mfg.oper.workcell.head.tooltbl.tool_pocket.tool_id
12. mfg.oper.workcell.head.tooltbl.tool_pocket.tool_comment
13. mfg.oper.workcell.head.tooltbl.tool_pocket.tool_position
The resulting table may look like the one shown below.
TOOL LISTING for SUPPORT_PLATE
OPERATION
MACHINE
TOOL
COMMENT
POCKET #
OP010
Makino
T0001
1" FEM
12
T0003
0.550 Std Tooling
13
T0003
0.550 Std Tooling
2
OP020
Cincy
D0004
5
A0010
7
Example 2: Accessing NC Sequence Parameters
To produce a listing of all NC sequences along with selected parameters, define your repeat regions as shown in the following illustration (enter report symbols into cells as shown).
1. Outer region
2. Inner region
3. OPERATION
4. SEQUENCE NAME
5. TOOL
6. FEED
7. COOLANT
8. mfg.oper.name
9. mfg.oper.ncseq.name
10. mfg.oper.ncseq.tool_id
11. mfg.oper.ncseq.cut_feed
12. mfg.oper.ncseq.coolant_option
 
* To enter TOOL, FEED, and COOLANT symbols in the example above, click Report Sym on the ENTER CELL menu, then click mfg, oper, ncseq, User Defined and type tool_id, cut_feed, or coolant_option, respectively.
The resulting table may look like the following.
OPERATION
SEQUENCE NAME
TOOL
FEED
COOLANT
OP010
1: Volume
T0001
12
FLOOD
\
2: Cleanup
T0003
10
OFF
\
3: Profile
T0003
15
OFF
OP020
6:\ Holemaking
D0004
8
FLOOD
\
8:\ Countersink
A0010
9.5
OFF