Manufacturing > NC Check > NC-Check > About Using NC-CHECK
About Using NC-CHECK
Optional module NC-CHECK™ allows you to display a step-by-step simulation of material removal as the tool is cutting the workpiece. This dynamic simulation process is called NC Check.
NC Check is implemented for all types of NC sequences. If a tool model has been used, it will be replaced by the default tool of appropriate type, as defined by the tool parameter values. If a sketched tool is used, the tool display will be based on the sketch (revolved for Trajectory milling, extruded for Trajectory turning).
* The sketched tool’s section cannot contain splines or self-intersecting entities.
The material is removed according to the actual tool shape and motion, that is, all scallops left by the tool passes will be displayed.
* NC Check is not implemented for Side Mill tools.