Manufacturing assembly parameters store information about the Creo NC process environment after the most recent extraction. They are read-only parameters and are designated parameters by default. Manufacturing assembly parameters provide information about the extraction status to an Creo NC user in Windchill. Click Info > Manufacturing > NC Sequence or MANUFACTURE > Set Up > Parameters to see the manufacturing parameters. The list of parameters and the information they store follows.

MFG_NUM_OF_REF_MODELS

Specifies the number of design models in the manufacturing assembly after extraction. The MFG_NUM_OF_REF_MODELS parameter is available when the manufacturing assembly contains a design model and an extraction is performed.

MFG_REF_MODEL_NAME_X

Specifies the name of the design model or models in the manufacturing assembly after extraction. X represents the order of the design models in the manufacturing assembly. For example, the parameter for the design model assembled first is MFG_REF_MODEL_NAME_1, the parameter for the design model assembled next is MFG_REF_MODEL_NAME_2, and so on.

The MFG_REF_MODEL_NAME_X parameter is available when the manufacturing assembly contains a design model and an extraction is performed.

MFG_REF_MODEL_VERSION_X

Specifies the version of the design model or models in the manufacturing assembly after extraction. X represents the order of the design models in the manufacturing assembly. For example, the version for the design model assembled first is MFG_REF_MODEL_VERSION_1, the version for the design model assembled next is MFG_REF_MODEL_VERSION_2, and so on.

The MFG_REF_MODEL_VERSION_X parameter is available when the manufacturing assembly contains a design model and an extraction is performed.

MFG_EXTRACTION_DATE

Specifies the date and time of the most recent extraction. The MFG_EXTRACTION_DATE parameter is available after an extraction has been performed.

MFG_EXTRACTION_PROCESS_TEMPLATE

Specifies the name of the process template used for the most recent extraction. The MFG_EXTRACTION_PROCESS_TEMPLATE parameter is available after an extraction has been performed.