To Modify the Size of a Hatch Pattern
1. Right-click a cross section on the Model Tree and click Edit Hatching. TheEdit Hatching dialog box opens.
2. If you are editing an assembly cross section, then select the parts to edit the section hatch pattern. The selected parts are placed in the collector.
3. Use Use hatch from the part or Use hatch from the library to select a hatch pattern to modify.
4. In the
Scale box specify a value to size the hatch pattern. Alternatively, click
to double the size of the hatch pattern or click
to halve the size of the hatch pattern.
5. Click Apply. The settings are stored in the model and are available when you open the model in another session.