To Define the BOM Format

Fundamentals > Creo Parametric User Interface > The Tools Tab > Getting Information > Getting Part and Assembly Information > To Define the BOM Format

1. Using the system editor, create the BOM output format file.

2. Add the following option to the configuration file:

bom_format formatname.fmt

3. In Creo Parametric, add user-defined parameters to parts and assemblies using Tools > Relations > Parameters > Add Parameter.

4. Click Tools >

Bill of Materials. The BOM appears in an INFORMATION WINDOW and is written to file.

Assembly members that are blanked on a layer or suppressed through assembly representation are listed in the BOM for the assembly as if they were displayed.