Fundamentals > Creo Parametric User Interface > The Analysis Tab > Analyzing Surfaces > Example: Draft Check on a Part
  
Example: Draft Check on a Part
The following example illustrates a draft gradient for both sides where the draft angle is 6 degrees and the upper and lower angles are 18 degrees, respectively. The upper and lower color is set to the default, that is, blue and red, respectively. In the shaded analysis, the red color indicates an adequate draft for the lower half of the mold while blue indicates an adequate draft for the upper half of the mold. White indicates the areas of the mold that have an inadequate amount of draft, while the graded colors indicate areas that are within the draft limit.