ECAD > Configuring and Setting the Environment for ECAD > Settings for Assemblies Modeling ECAD > Configuration Options for Assemblies Modeling ECAD
  
Configuration Options for Assemblies Modeling ECAD
dazix_default_placement_unit
micron*, mm, thou
Specifies the units to be used for data imported in Dazix files.
dazix_export_mounthole
yes, no*
yes—Causes the MOUNTHOLE section of a Dazix file to be processed as a mount hole.
no—Causes the MOUNTHOLE section to be processed as a cut.
dazix_z_translation
yes*, no
yes—Passes the objects in the .edn files through z translation.
ecad_comp_csys_def_name
Specifies the default coordinate system name added to an ECAD component being imported or exported. You can use this configuration option to assign a coordinate system name for the export of component outlines to the ECAD EDA (*.eda) format. When not set to the name of any component coordinate system, the first coordinate system is automatically used.
ecad_board_csys_def_name
Specifies the default coordinate system name added to an ECAD board being exported or imported. When not set to the name of any board coordinate system, the coordinate system with the name, ECAD_DEFAULT is used.
ecad_default_comp_place_status
placed*, unplaced, fixed, mcad, ecad
placed—Sets default component placement status for export (parameter setting overrides the default).
ecad_other_outl_csys_def_name
Specifies the default coordinate system name for the OTHER_OUTLINE section of an IDF 2.0 ECAD component being imported. If you do not set the coordinate system, Creo Parametric uses ECAD DEFAULT as the coordinate system name.
ecad_panel_csys_def_name
Specifies the default coordinate system name added to an ECAD panel being imported. If you do not set this variable, you are prompted for a name.
mentor_ver_2_0
yes*, no
yes—Exports the file in IDF 2.0 format.
no—Exports the file in IDF 1.0 format unless you select IDF 2.0 from the ECAD FORMAT menu.