Electrical Design > Using Diagram > Drawing Setup File Options for Diagram
  
Drawing Setup File Options for Diagram
The following drawing setup options can also apply to diagrams.
Drawing Option
Description
drawing_text_height
Sets the default text height for all text in the drawing using the value set for drawing_units.
text_thickness
Sets the default text thickness for new text after you regenerate an existing text whose thickness has not been modified. Enter the value in drawing units.
text_width_factor
Sets the default ratio between the text width and text height. The system maintains this ratio until you change the width with the Text Width option.
default_font
Sets the default text fonts to be those fonts listed in the specified font index. Do not include the .ndx extension. The fonts font and filled are in the setup file.
draw_arrow_length
Sets the length of the leader line arrows.
draw_arrow_style
Sets the style of arrows.
draw_arrow_width
Sets the width of leader line arrows. This drawing setup file option drives these other drawing setup file options:
draw_attach_sym_height
draw_attach_sym_width
draw_dot_diameter
draw_attach_sym_height
Sets the height of leader line slashes, integral signs, and boxes. If you specify default, uses the value set for draw_arrow_width.
draw_attach_sym_width
Sets the width of leader line slashes, integral signs, and boxes. If you specify default, uses the value set for draw_arrow_width.
draw_dot_diameter
Sets the diameter of leader line dots. If you specify default, uses the value set for draw_arrow_width.
leader_elbow_length
Determines the length of the leader elbow (the horizontal leg attached to the text).
decimal_marker
Determines which character marks the decimal point in secondary dimensions.
drawing_units
Sets the units for all drawing parameters.
line_style_standard
Controls text color in drawings. Unless you set this option to STD_ANSI, shows all text in drawings in blue, and shows the boundary of the detail view in yellow.
max_balloon_radius
Sets the maximum allowable balloon radius. If set to 0, balloon radius depends only on text size.
min_balloon_radius
Sets the minimum allowable balloon radius. If set to 0, balloon radius depends only on text size.
sym_flip_rotated_text
Flips text in a Rotate Text symbol that is upside down, making it right-side up. If set to yes. and the symbol orientation is +/- 90 degrees, flips the text, rotating it along with the symbol.
pos_loc_format
Controls appearance of &pos_loc text in notes and report tables. %%=<a single %>, %s=<sheet number>, %x=<horizontal position> %y=<vertical position> %r=<end of repeatable substring> (The default is %s%x%y, %r)