Detailed Drawings > Annotating the Drawing > Geometric Tolerances > Example: Adding a Geometric Tolerance to a Drawing
  
Example: Adding a Geometric Tolerance to a Drawing
Follow the below procedure, and use the characteristics and values given in this table to create a sample geometric tolerance.
Sample geometric tolerance Characteristics and Values
Characteristic
Value
Entity
Hole
Tolerance Location
As part of a diameter dimension
Class and Type
Location/Position (a "true position" tolerance)
Overall Tolerance Value
0.25
Material Condition
MMC
Primary Datum (A) Material Condition
RFS/Default
Secondary Datum (B) Material Condition
RFS/Default