Creo Intelligent Fastener > Using Creo Intelligent Fastener > Customizing Creo Intelligent Fastener > To Add Catalog Groups
  
To Add Catalog Groups
1. Open the catalog file you want to modify.
2. Add the names for your groups behind the keywords #screws, #washers, # nuts, and #pins. The group state is expanded by default. To show groups collapsed, add the keyword #collapsed.
3. Save the changes and close the file.
4. Add your group names to the library translation file if you want to translate them.
5. Add catalog group icons if required.
Example of Group by Nut Type
In the following example, the ISO nuts are organized in groups. The first two nuts are always available. The other nuts appear in collapsed groups.
#nuts
ISO4032-8
ISO4035-04

#nuts#collapsed Hexagon Nuts
ISO4032-6
ISO4032-10
ISO4033-9
ISO4033-10
ISO4033-12

#nuts#collapsed Hexagon Thin Nuts
ISO4035-14H
ISO4035-05

#nuts#collapsed Prevailing Torque
ISO7040-5
ISO7040-8
ISO7040-10
ISO10511-5
ISO10511-8
ISO10511-10
Example of Group by Material
In this example the nuts are organized in groups by material. All groups are expanded.
#nuts 8
ISO4032-8
ISO7040-8
ISO10511-8

#nuts 10
ISO4032-10
ISO4033-10
ISO7040-10
ISO10511-10