To Move or Rotate a Project Subassembly
1. Select the subassembly to move or rotate using either of the methods below:
◦ In the
Subassemblies group, click
Framework >
Move. The
Move Subassembly dialog box opens and the
Subassembly to Move box is activated. In the assembly, select a project subassembly to move.
◦ Select a project subassembly in the model that you want to move. In the
Subassemblies group, click
Framework >
Move or right-click and select
Framework >
Move. The
Move Subassembly dialog box opens.
2. Under Move, use the options listed below to move the subassembly: The movement is displayed as a preview.
◦ 
—Aligns the selected surface, edge or vertex geometry element of the project subassembly with the reference curve
◦ 
—Aligns the selected surface, edge or vertex geometry element of the project subassembly with a geometry element of another part that is selected in the
Reference Geometry reference collector.
◦ 
—Offsets the selected project subassembly by specific values
◦ 
—Resets the position of the selected project subassembly
A preview of the moved subassembly is displayed.
3. Under Rotate use the options listed below to rotate the subassembly:
◦ 
—Rotates the selected project subassembly by the angle indicated
◦ 
—Rotates the selected project subassembly by the angle indicated
◦ 
—Rotates the selected project subassembly by a specific value
◦ 
—Toggles the start and end points of the selected project subassemblies
A preview of the rotation is displayed.
4. Click one of the options listed below to continue:
◦ OK to complete the movement of the project subassembly and close the dialog box.
◦ Repeat to complete the movement of the project subassembly without closing the dialog box and then continue with the moving of another project subassembly.
◦ Cancel to cancel the project subassembly movement and close the dialog box.