Creo Advanced Framework > Using Creo Advanced Framework > Working with Subassemblies > Assembling Subassemblies > About the Position Subassembly Dialog Box
  
About the Position Subassembly Dialog Box
The following commands are available on the Position Subassembly dialog box:
Area
Icon
Command
Reference Method
Assemble on a straight curve
Assemble between two points
References
Click the first reference collector to select first reference for profile assembly
Click the second reference collector to select second reference for profile assembly if required
Orientation plane
Click reference collector to select orientation plane for profile assembly if required
Move
Move by specific values
Reset subassembly move.
Rotate
Rotate by -90°
Reset
Rotate by 180°
Rotate by 90°
Rotate by a specific angle
Toggle start and end points
Filename
Enter a name or accept the default