UI Customization Support

Concepts
Available Commands: sd-load-additional-available-commands-file
sd-load-all-additional-available-command-files
sd-enable-application-commands
sd-disable-application-commands
sd-define-available-command
sd-delete-available-command
sd-inq-available-command-data
Toolbars: sd-load-toolbar
sd-load-all-toolbars
sd-show-toolbar
sd-hide-toolbar
sd-toolbar-visible-p
sd-assign-toolbar-group
sd-remove-toolbar
sd-remove-all-toolbars
sd-set-toolbar-button
sd-reset-toolbar-button
sd-get-toolbar-combobox-selected-item
sd-set-toolbar-combobox-selected-item
Directories and Files: sd-load-customization-file
sd-get-customization-file
sd-get-app-specific-customization-file
sd-inq-app-specific-user-customization-dir
sd-inq-app-specific-user-customization-file
sd-get-app-customization-subdirectory
sd-get-app-customization-file-prefix
sd-get-app-external-name
sd-add-application-data
sd-inq-application-data-p

Concepts

To learn more about Available Commands and Toolbar customization, please read the Customization Guide for Administrators and Advanced Users.

The functions described on this page enable you to enhance your add-on application with customization capabilities which the Creo Elements/Direct Modeling user can use in his personal toolbars.
Simple add-on applications which augment the functionality of Creo Elements/Direct Modeling. When the user switches to this add-on application, all core Creo Elements/Direct Modeling functionality will be accessible well.

The following steps are necessary to enable an add-on application for user customization:

  On activation of your add-on application "My-App":

    ;; load all "My-App" specific available commands:
    (sd-load-all-additional-available-command-files "My-App/myapp_avail_cmds.cmd")
    ;; enable these commands:
    (sd-enable-application-commands "My-App")
  
    ;; load and enable toolbars:
    (sd-load-all-toolbars "My-App")


  On deactivation of your add-on application "My-App":

    ;; disable all "My-App" specific available commands:
    (sd-disable-application-commands "My-App")

Note:

If your add-on application creates an application specific graphical browser, you should add the following lines to the :activateAction and :cleanupAction of your application button:

  :activateAction '(progn
                      ;; ...
                      (sd-show-graphical-browser "My-App-Browser" :tabOnly t)
                      ;; ...
                   )
  :cleanupAction  '(progn
                      ;; ...
                      (sd-hide-grahpical-browser "My-App-Browser" :inclTab t)
                      ;; ...
                   )

SD-LOAD-ADDITIONAL-AVAILABLE-COMMANDS-FILE [function]

(sd-load-additional-available-commands-file filename)

Description:

Loads the additional available commands specified in filename into Creo Elements/Direct Modeling to allow the user to use these commands in popup menus and toolbars.
If a command with the same triple Application-Group-CommandName existed in Creo Elements/Direct Modeling already, this command gets redefined with the parameters defined in this available commands file.

Parameters:

filename {STRING}: Full path to a file which contains the specification of additonal available commands.
See Creo Elements/Direct Modeling's default file under personality/sd_customize for a full description of the required contents syntax.

Return Value:

t - success
nil - failure

Example:

(sd-load-additional-available-commands-file "C:/Program Files/PTC/Creo Elements/Direct Modeling 20.7.1.0/add-on-app/sd_customize/var_app_cmds.cmd")

SD-LOAD-ALL-ADDITIONAL-AVAILABLE-COMMAND-FILES [function]

(sd-load-all-additional-available-command-files relative-file)

Description:

This function loads all available commands from files with name relative-file searched in User/Site/Corp/SD customization directories. Commands with the same triple Application-Group-CommandName overwrite each other. The precedence is

User
Site (if set)
Corp (if set, if not set: Creo Elements/Direct Modeling's default directory)

That means a User command will overwrite/redefine the same Site/Corp/SD command and so on.

Parameters:

relative-file {STRING}: Name of the available commands file to be searched and loaded. This string may also contain directory names which refer to subdirectories in the specific User/Site/Corp customization directories.

Return Value:

t - success
nil - failure

Example:

(sd-load-all-additional-available-command-files "ANNOTATION/avail_cmds.cmd")

 tries to load the following files in the following order:
  
  1.  $SDINSTALLDIR/personality/sd_customize/ANNOTATION/avail_cmds.cmd
  2.  $SDCORPCUSTOMIZEDIR/ANNOTATION/avail_cmds.cmd   (if set)
  3.  $SDSITECUSTOMIZEDIR/ANNOTATION/avail_cmds.cmd   (if set)
  4a. $SDUSERCUSTOMIZEDIR/ANNOTATION/avail_cmds.cmd   (if set)  or
  4b. $USER_PROFILE_DIR/PTC/Creo Elements Direct Modeling 20.7.1.0/20.7/ANNOTATION/avail_cmds.cmd

SD-ENABLE-APPLICATION-COMMANDS [function]

(sd-enable-application-commands application :exclusive exclusive-flag)

Description:

Enables all available commands defined for the application with name application. If the exclusive flag is given, only available commands belonging to application and to the application "All" will be accessible.

Parameters:

application {STRING} - Name of application who's command should be enabled
:exclusive {BOOLEAN [nil]}: Flag to indicate whether the application commands should be the only activated commands (including commands belonging to "All") or not.

Return Value:

t - success
nil - failure

Examples:

(sd-enable-application-commands "SheetAdvisor")

(sd-enable-application-commands "Annotation" :exclusive t)

SD-DISABLE-APPLICATION-COMMANDS [function]

(sd-disable-application-commands application)

Description:

Disables available commands belonging to the application with name application. Toolbar and popup menu buttons which reference commands of this application will become insensitive (greyed out) automatically.
The list of commands in the Customize menu will only contain commands to be used on e.g. toolbars which are enabled.

Parameters:

application {STRING} - Name of application who's commands should be disabled

Return Value:

t - success
nil - failure

Example:

(sd-disable-application-commands "Annotation")

SD-DEFINE-AVAILABLE-COMMAND [function]

(sd-define-available-command application group command
                             :groupTitle              group-title
                             :commandTitle            command-title
                             :action                  command-action
                             :description             description
                             :image                   image
                             :ui-behavior             ui-behavior
                             :accelerator             accelerator
                             :enable                  enable-form
                             :context-enable          context-enable-form)
                             :update-unknown-commands update-unknown-commands)

Description:

Defines a new available command.
Note: You can't redefine an existing available command with the same identification application-group-command. You can only define a new command with this function.
For more information on parameters and examples, see personality/sd_customize/sd_avail_cmds.cmd.

Parameters:

application {STRING} - Name of application
group {STRING} - Name of group
command {STRING} - Name of command
:groupTitle {STRING} - optional localized group title
:commandTitle {STRING} - optional localized command title
:action {STRING or LISP-form} - the command action
:description {STRING} - optional command description
:image {STRING} - relative path to optional toolbar image
:ui-behavior {KEYWORD} - :default, :relative or :none
:accelerator {STRING} - optional accelerator key definition
:enable {LISP-form} - determines whether command is enabled or not
:context-enable {LISP-form} - determines whether command is enabled or not when used in context menus
:update-unknown-commands {BOOLEAN [t]} - In case an available command is added to any toolbar (quick access toolbar, command mini toolbar) or ribbon button before the definition of the available command is done the action of the button in the toolbar or ribbon button is not defined. Such a command is called an 'unknown command' and is added to the command database as a 'place holder'. After definition of a new available command the unknown command that matches application, group and command is replaced by the new command. This process might decrease the performance. Set this parameter to nil in case more than a single available command is defined. For the last command definition set it to t. A single update of all toolbars and ribbon buttons is enough for updating unknown commands.

Return Value:

t - success
nil - failure

SD-INQ-AVAILABLE-COMMAND-DATA [function]

(sd-inq-available-command-data application group command)

Description:

Inquire the properties of an existing available command with identification application-group-command.

Parameters:

application {STRING} - Name of application
group {STRING} - Name of group
command {STRING} - Name of command

Return Value:

values - {PROPERTY LIST} containing the data of the found available command. A description of the data is listed at sd-define-available-command.
nil - failure / or command does not exist - 2nd return value shows reason

SD-DELETE-AVAILABLE-COMMAND [function]

(sd-delete-available-command application group command)

Description:

Deletes an available command with identification application-group-command. All buttons which refer to this available command become greyed out.

Parameters:

application {STRING} - Name of application
group {STRING} - Name of group
command {STRING} - Name of command

Return Value:

t - success
nil - failure

SD-LOAD-TOOLBAR [function]

(sd-load-toolbar filename :toolbarGroup toolbar-group)

Description:

Loads a toolbar which is defined in a definition file with name filename. If this toolbar belongs to an application which is currently not activated or not current, the toolbar will be invisible.
If you specify the optional toolbar-group you'll assign automatically this group to this toolbar.

Parameters:

filename {STRING}: Absolute or relative (to Creo Elements/Direct Modeling's search directories) path to a toolbar definition file. Please see $INSTALLDIR/personality/sd_customize/*.tlb for examples of toolbar definition files.
:toolbarGroup {STRING}: Assigns the passed toolbar group automatically to this toolbar. Use this parameter if you want to remove a collection of toolbars belonging to a specific group automatically via sd-remove-all-toolbars.

Return Value:

list - list of toolbar name and application
nil - failure

Examples:

(sd-load-toolbar "c:/users/joe/Modeling/my_stuff/power1.tlb")
 => ("Power 1" "SolidDesigner")

(sd-load-toolbar "c:/users/joe/Modeling/my_stuff/simply.tlb" :toolbarGroup "Simplification")
 => ("Simplification" "SolidDesigner")

SD-LOAD-ALL-TOOLBARS [function]

(sd-load-all-toolbars directory :toolbarGroup toolbar-group)

Description:

Loads all toolbars in directory if directory is a valid existing directory, or in a directory relative to the User/Site/Corp/SD customization directories.
If you specify the optional toolbar-group you'll assign automatically this group to all loaded toolbars.

Parameters:

directory {STRING} - Existing directory or relative directory
:toolbarGroup {STRING}: Assigns the passed toolbar group automatically to every loaded toolbar. Use this parameter if you want to remove a collection of toolbars belonging to a specific group automatically via sd-remove-all-toolbars.

Return Value:

list of lists - list of lists of toolbar name and application
nil - failure

Examples:

Existing directory:
 
  (sd-load-all-toolbars "C:/users/joe/my_toolbars")

    => (("Power 1" "SolidDesigner") ("Anno 1" "Annotation")  ...)

Relative directory:

  (sd-load-all-toolbars "VAR_app")

   loads all *.tlb files in the following directories
   (Toolbars with same names will overwrite each other):

     1.  $SDCORPCUSTOMIZEDIR/VAR_app/*.tlb   (if set)
     2.  $SDSITECUSTOMIZEDIR/VAR_app/*.tlb   (if set)
     3a. $SDUSERCUSTOMIZEDIR/VAR_app/*.tlb   (if set)  or
     3b. $USER_PROFILE_DIR/PTC/Creo Elements Direct Modeling 20.7.1.0/20.7/VAR_app/*.tlb

  Load all Design Simplification Toolbars from user/site/corp/sd
  directories (subdirectory "DesignSimp") and assign toolbar group
  "Simplification" to each loaded toolbar:

    (sd-load-all-toolbars "DesignSimp" :toolbarGroup "Simplification")

SD-SHOW-TOOLBAR [function]

(sd-show-toolbar toolbar-name :application application)

Description:

Shows a toolbar with name toolbar-name which belongs to application. Usually this function is not necessary to call manually since showing and hiding of application specific toolbars is done automatically.
Note: The parameter toolbar-name indicates the not localized internal toolbar identifier string and not the localized string which appears in the UI as toolbar title. See the toolbar definition file: toolbar-name is the one next to :name and not the one given as :title parameter.

Parameters:

toolbar-name {STRING} - Name of toolbar to show
:application {STRING [SolidDesigner]} - Name of application this toolbar belongs to

Return Value:

t - success
nil - failure

Examples:

(sd-show-toolbar "Standard")
(sd-show-toolbar "View" :application "Annotation")

SD-HIDE-TOOLBAR [function]

(sd-hide-toolbar toolbar-name :application application)

Description:

Hides a toolbar with name toolbar-name which belongs to application. Usually this function is not necessary to call manually since showing and hiding of application specific toolbars is done automatically.
Note: The parameter toolbar-name indicates the not localized internal toolbar identifier string and not the localized string which appears in the UI as toolbar title. See the toolbar definition file: toolbar-name is the one next to :name and not the one given as :title parameter.

Parameters:

toolbar-name {STRING} - Name of toolbar to hide
:application {STRING [SolidDesigner]} - Name of application this toolbar belongs to

Return Value:

t - success
nil - failure

Examples:

(sd-hide-toolbar "Standard")
(sd-hide-toolbar "View" :application "Annotation")

SD-ASSIGN-TOOLBAR-GROUP [function]

(sd-assign-toolbar-group toolbar-name :application  application
                                      :toolbarGroup toolbar-group)

Description:

Assigns the toolbar-group to the toolbar identified by toolbar-name and application. See sd-load-toolbar, sd-load-all-toolbars, sd-remove-toolbar and sd-remove-all-toolbars for more information.

Parameters:

toolbar-name {STRING} - Name of toolbar
:application {STRING [SolidDesigner]} - Name of application this toolbar belongs to
:toolbarGroup {STRING} - Toolbar group which should be assigned to toolbar

Return Value:

t - success
nil - failure

SD-REMOVE-TOOLBAR [function]

(sd-remove-toolbar toolbar-name :application application)

Description:

Removes the toolbar identified by toolbar-name and application from the current Creo Elements/Direct Modeling session.
This call guarantees that the docking information (screen location, docked or floating and visibility state) is kept in all applications where this toolbar was accessible.
Use this call to remove a toolbar again from Creo Elements/Direct Modeling (loaded by some add-on functionality) in case the user deactivates the add-on functionality module (e.g. Simplification or Relations (Assembly, Parametrics)).

Parameters:

toolbar-name {STRING} - Name of toolbar
:application {STRING [SolidDesigner]} - Name of application this toolbar belongs to

Return Value:

t - success
nil - failure

SD-REMOVE-ALL-TOOLBARS [function]

(sd-remove-all-toolbars :toolbarGroup toolbar-group)

Description:

Removes all toolbars which belong to the specified toolbar-group from the current Creo Elements/Direct Modeling session.
This call guarantees that the docking information (screen location, docked or floating and visibility state) of each toolbar is kept in all applications where the toolbar was accessible.
Use this call to remove all toolbars again from Creo Elements/Direct Modeling (loaded by sd-load-all-toolbars) in case the user deactivates add-on functionality (e.g. Simplification or Relations (Assembly, Parametrics)) which caused the load of the toolbars.
Note: This call is NOT necessary if you want to remove toolbars which belong to an application like SheetAdviser. On deactivation of those applications, all toolbars belonging to that application are removed automatically.

Parameters:

:toolbar-group {STRING} - Name of toolbar group

Return Value:

t - success
nil - failure

Example:

(sd-remove-all-toolbars :toolbarGroup "Simplification")

SD-TOOLBAR-VISIBLE-P [function]

(sd-toolbar-visible-p toolbar-name :application application)

Description:

Checks if toolbar with name toolbar-name which belongs to application is visible or not.

Parameters:

toolbar-name {STRING} - Name of toolbar to check
:application {STRING [SolidDesigner]} - Name of application this toolbar belongs to

Return Value:

t - toolbar is visible, docked or floating
nil - toolbar is invisible or does not exist

SD-SET-TOOLBAR-BUTTON [function]

(sd-set-toolbar-button application group command)

Description:

Makes an available command button identified by application, group and command look pressed in on toolbars and context menus.
The right identifier strings can be looked up in personality/sd_customize/sd_avail_cmds.cmd or in the file where the available command is specified in.
Note: The action associated with this button does not get executed with this function.

Parameters:

application {STRING} - Name of application
group {STRING} - Name of group
command {STRING} - Name of command

Return Value:

t - success
nil - failure

Example:

(sd-set-toolbar-button "SolidDesigner" "Show" "3D Geometry On/Off")

SD-RESET-TOOLBAR-BUTTON [function]

(sd-reset-toolbar-button application group command)

Description:

Makes an available command button identified by application, group and command look normal (not pressed in) on toolbars and context menus.
The right identifier strings can be looked up in personality/sd_customize/sd_avail_cmds.cmd or in the file where the available command is specified in.

Parameters:

application {STRING} - Name of application
group {STRING} - Name of group
command {STRING} - Name of command

Return Value:

t - success
nil - failure

Example:

(sd-reset-toolbar-button "SolidDesigner" "Show" "3D Geometry On/Off")

SD-GET-TOOLBAR-COMBOBOX-SELECTED-ITEM [function]

(sd-get-toolbar-combobox-selected-item application group command)

Description:

Returns the current selected item of an available command (specified by application, group and command) which has a range specification.

Parameters:

application {STRING} - Name of application
group {STRING} - Name of group
command {STRING} - Name of command

Return Value:

item {STRING} - the selected item
nil - failure

Example:

(sd-get-toolbar-combobox-selected-item "SolidDesigner" "Select" "Preselection")
   => "All"

SD-SET-TOOLBAR-COMBOBOX-SELECTED-ITEM [function]

(sd-set-toolbar-combobox-selected-item application group command item)

Description:

Sets the current selected item of an available command (specified by application, group and command) which has a range specification.
Note: The action associated with this range item does not get executed with this function.

Parameters:

application {STRING} - Name of application
group {STRING} - Name of group
command {STRING} - Name of command
item {STRING} - Identifier of range item

Return Value:

t - success
nil - failure

Example:

(sd-set-toolbar-combobox-selected-item "SolidDesigner" "Select" "Preselection" "Part")

SD-LOAD-CUSTOMIZATION-FILE [function]

(sd-load-customization-file basename :subdirectory subdirectory
                                     :application  application
                                     :which        which
                                     :order        order)

Description:

Loads a customization file from one or more customization directories.
If subdirectory is given, the file which is loaded is searched as subdirectory/basename.
If application is given instead of subdirectory, the file which is searched is composed out of information held in a table which is written at startup time as README.txt to your personal customization directory. Depending on the values in this table, the filename is application-subdirectory/application-file-prefix_basename.
If neither subdirectory nor application is given, the basename itself is taken to be searched in the customization directories.

Parameters:

basename {STRING} - base name of the file to be loaded

:subdirectory {STRING}

Optional subdirectory to be searched in the user/site/corp customization directories. Note: This directory is always relative to the customization directories and the string has to end with a "/".

:application {STRING}

Alternative way to specify a relative filename to be loaded. Based on information written to SDUSERCUSTOMIZEDIR/README.txt the filename to be loaded is application-subdirectory/application-file-prefix_basename. Note, if no prefix is given, the basename itself is taken. If no application specific subdirectory is given, the file will be loaded from the stock user/site/corp directories.
This string is the internal application name which is listed in the fourth column of the README.txt file.

:which {KEYWORD :all or :first [:all]}

Indicates whether all files found according to the order given in order should be loaded or just the first. If you want to load just the first file found according to the order given, please specify :first for this parameter.

:order {KEYWORD [see below]}

Specifies the order how files will be loaded if found. It can be one of:

:sd-corp-site-user or
:user-site-corp-sd

If :which is set to :all the default order is :sd-corp-site-user, i.e. the file will be loaded first from the personality/sd_customize directory, then from a corp, site and finally from the user directory if found in any of the directories.
If :which is set to :first the default order is :user-site-corp-sd, i.e. Creo Elements/Direct Modeling starts searching for the file from the user directory on.

Return value:

filename - In case of which set to :first and a file was found
(list of filenames) - If which was set to :all this list contains the full path of all files loaded
nil - no customization file found and loaded

Examples:

  (sd-load-customization-file "sd_customize")

  (sd-load-customization-file "am_customize" :subdirectory "ANNOTATION/")
    is equivalent to
  (sd-load-customization-file "customize" :application "Annotation")

SD-GET-CUSTOMIZATION-FILE [function]

(sd-get-customization-file basename :subdirectory subdirectory
                                    :application  application
                                    :first-found  first-found)

Description:

Retrieves a user/site/corp/sd customization file and returns one or all found files with full pathname(s).
If subdirectory is given, the file which is searched is composed out of subdirectory/basename.
If application is given instead of subdirectory, the file which is searched is composed out of information held in a table which is written at startup time as README.txt to your personal customization directory. Depending on the values in this table, the filename is application-subdirectory/application-file-prefix_basename.
If neither subdirectory nor application is given, the basename itself is taken to be searched in the customization directories.

Parameters:

basename {STRING} - base name of the file to be searched

:subdirectory {STRING [""]}

:application {STRING}

Alternative way to specify a relative filename to be searched. Based on information written to SDUSERCUSTOMIZEDIR/README.txt the filename to be searched is application-subdirectory/application-file-prefix_basename. Note, if no prefix is given, the basename itself is taken. If no application specific subdirectory is given, the file will be searched in the stock user/site/corp directories.
This string is the internal application name which is listed in the fourth column of the README.txt file.

:first-found {BOOLEAN [t]}

Indicates whether search should terminate with the first file found. The order of search is:

User customization directory ($USER_PROFILE_DIR/PTC/Creo Elements Direct Modeling 20.7.1.0/'major'.'minor')
Site customization directory (i.e. $SDSITECUSTOMIZEDIR)
Corporate customization directory (i.e. $SDCORPCUSTOMIZEDIR)
Creo Elements/Direct Modeling customization directory ($SDDIR/personality/sd_customize)

If this variable is set to NIL, this function returns all files found as a list. In the other case the first file found is returned.

Return value:

multiple values: <filename> <type>

Case :first-found is set to T:

First value returned: filename with full path
Second value returned: type, one of the following keywords:
- :user
- :site
- :corp
- :sd
to indicate where the file was found; either in the user/site/corp or Creo Elements/Direct Modeling default customization directory.

Case :first-found is set to NIL:

First value returned: List of filenames
Second value returned: List of corresponding types

nil - no customization file found

Examples:

  (sd-get-customization-file "sd_customize")
   => 1. "$USER_PROFILE_DIR/PTC/Creo Elements Direct Modeling 20.7.1.0/20.7/sd_customize"
      2. :user


  (sd-get-customization-file "machine.tlb" :subdirectory "toolbars/")
   => 1. "I:/Modeling_Site/toolbars/machine.tlb"
      2. :site

SD-GET-APP-SPECIFIC-CUSTOMIZATION-FILE [function]

(sd-get-app-specific-customization-file basename application)

Description:: Equivalent to (sd-get-customization-file basename :application application :first-found t).
For more information, see sd-get-customization-file.

SD-INQ-APP-SPECIFIC-USER-CUSTOMIZATION-DIR [function]

(sd-inq-app-specific-user-customization-dir application
                                            :create-if-needed create-if-needed)

Description:

Returns the full path to the application specific customization directory under your personal customization directory. If the specific directory does not exist yet and :create-if-needed is set to T, it will be created.
Please see SDUSERCUSTOMIZEDIR/README.txt for details.

Parameters:

application {STRING}: String as written in the fourth column in SDUSERCUSTOMIZEDIR/README.txt. This name is taken to get the information from the table on how the application specific subdirectory should be named.
Note: If application is not found in the table, a directory with name application will be created/returned under your personal customization directory.
:create-if-needed {BOOLEAN [t]}: If the application specific user customization directory does not exist yet, it will be created automatically if this flag is set to T.

Return value:

directory - full path to the application specific user customization directory
nil - no directory found or could not be created

Example:

  (sd-inq-app-specific-user-customization-dir "Annotation")
     => "C:/Documents and Settings/joe/Application Data/PTC/Creo Elements Direct Modeling 20.7.1.0/20.7/ANNOTATION"

SD-INQ-APP-SPECIFIC-USER-CUSTOMIZATION-FILE [function]

(sd-inq-app-specific-user-customization-file basename application)

Description:

Returns the full path to a file in your personal customization directory composed out of information given in basename and application. Note, neither the file nor the application specific subdirectory need to exist. If the subdirectory does not exist yet, it will be created.
The application specific subdirectory and prefix information is taken from an internal table which is written at Creo Elements/Direct Modeling startup as README.txt to your personal customization directory.
The returned filename looks like this:
$PROFILE/Application Data/PTC/Creo Elements Direct Modeling 20.7.1.0/20.7/'app-subdir'/'app-prefix'_basename

Parameters:

basename {STRING} - the basename of the file to return (see above)
application {STRING}: String as written in the fourth column in SDUSERCUSTOMIZEDIR/README.txt. This name is taken to get the information from the table on how the application specific subdirectory and the application specific file prefix are.

Return value:

filename - full path to the file as explained above
nil - directory could not be created

Example:

  (sd-inq-app-specific-user-customization-file "ui_layout.dat" "Annotation")
     => C:/Documents and Settings/joe/Application Data/PTC/Creo Elements Direct Modeling 20.7.1.0/20.7/ANNOTATION/am_ui_layout.dat

SD-GET-APP-CUSTOMIZATION-SUBDIRECTORY [function]

(sd-get-app-customization-subdirectory application)

Description:

Access function to return the application specific subdirectory name as defined in the internal table. This table is written at Creo Elements/Direct Modeling startup as README.txt to your personal customization directory.
Note: This function neither creates any directories nor returns a full path to a directory.

Parameters:

application {STRING}: String as written in the fourth column in SDUSERCUSTOMIZEDIR/README.txt. This name is taken as key to return the application specific subdirectory name as defined in the table.

Return value:

directory-name - application specific subdirectory name
application - in case no subdirectory is defined in table which fits to application

Example:

  (sd-get-app-customization-subdirectory "Annotation")
     => "ANNOTATION"

SD-GET-APP-CUSTOMIZATION-FILE-PREFIX [function]

(sd-get-app-customization-file-prefix application)

Description:

Access function to return the application specific file prefix as defined in the internal table. This table is written at Creo Elements/Direct Modeling startup as README.txt to your personal customization directory.

Parameters:

application {STRING}: String as written in the fourth column in SDUSERCUSTOMIZEDIR/README.txt. This name is taken as key to return the application specific file prefix as defined in the table.

Return value:

file-prefix - application specific file prefix
"" - in case no file prefix is defined in table which fits to application

Example:

  (sd-get-app-customization-file-prefix "Annotation")
     => "am"

SD-GET-APP-EXTERNAL-NAME [function]

(sd-get-app-external-name application)

Description:

Access function to return the official external product name for application. This information is taken from an internal table which is written at Creo Elements/Direct Modeling startup as README.txt to your personal customization directory.

Parameters:

application {STRING}: String as written in the fourth column in SDUSERCUSTOMIZEDIR/README.txt. This name is taken as key to return the external application name in the table.

Return value:

name - the external application name
application - in case no external name is defined in table which fits to application

Example:

  (sd-get-app-external-name "SolidDesigner")
     => "Modeling"

SD-ADD-APPLICATION-DATA [function]

(sd-add-application-data application
                         subdirectory
                         prefix
                         external)

Description:

Adds a new entry to an internal table which maps the application name to its specific subdirectory, prefix, and external product name. The initial table is written at Creo Elements/Direct Modeling startup as README.txt to your personal customization directory.

Parameters:

application {STRING}: String as written in the fourth column in SDUSERCUSTOMIZEDIR/README.txt. This name is taken as key to return application specific data.
subdirectory {STRING}: String as written in the second column in SDUSERCUSTOMIZEDIR/README.txt. It represents the application specific subdirectory name.
prefix {STRING}: String as written in the third column in SDUSERCUSTOMIZEDIR/README.txt. It represents the application specific file prefix.
external {STRING}: String as written in the first column in SDUSERCUSTOMIZEDIR/README.txt. It represents the application specific product name.

Return value:

t - success
nil - failure

Example:

  (sd-add-application-data "NewApplication"  ;; internal application name
                           "NewAppDir"       ;; application subdirectory
                           "na"              ;; file prefix
                           "NewApplication") ;; external product name
     => t

SD-INQ-APPLICATION-DATA-P [function]

(sd-inq-application-data-p application)

Description:

This function returns T if there is a data entry for the specified application in the internal table which maps the application name to its specific subdirectory, prefix, and external product name. The initial table is written at Creo Elements/Direct Modeling startup as README.txt to your personal customization directory.

Parameters:

application {STRING}: String as written in the fourth column in SDUSERCUSTOMIZEDIR/README.txt. This name is taken as key to return application specific data.

Return value:

t - success
nil - failure

Example:

  (sd-inq-application-data-p "SolidDesigner")
     => t