AM_CREATE_SYMBOL_WELDING creates welding symbols.
----->(AM_CREATE_SYMBOL_WELDING)---(:GO :OK)--->---+
|
|
+-----------------------<----------------------+
|
| +------------------<-----------------<-----------------<------------+
| | |
| | |
+---->----+(*)---(:OWNER)---|AM_GEO_SET_DOMAIN|---(:GO :OK)-----+-------------+----->
| |
+(**)-(:REFLINE)---|AM_CREATE_REFLINE_IR|---------------------------+
| |
+---(:SHAPE)---|801,811,821,802,812,822,804,814,824,806,816,826|----+
| |
+---(:POSITION)---+---(:TO_LEFT)-----+------------------------------+
| | | |
| +---(:TO_RIGHT)----+ |
| |
| +--------------<----------------+ |
| | | |
+---(:GEOM_VAR)---+---(:G1)---|0,401..403|--------+-----------------+
| | | |
| +---(:G2)---|0,301..328|--------+ |
| | | |
| +---(:G3)---|0,201..204|--------+ |
| | | |
| +---(:G4)---|0,501..528|--------+ |
| | | |
| +---(:G5)---|0,601..603|--------+ |
| | | |
| +---(:G6)---|0,601..603|--------+ |
| | | |
| +---(:G7)---|0,100,102|---------+ |
| |
| +--------------<----------------+ |
| | | |
+---(:TEXT_VAR)---+---(:T1)--------|string|-------+-----------------+
| |
+---(:T2)--------|string|-------+
| |
+---(:T3)--------|string|-------+
| |
+---(:T4)--------|string|-------+
| |
+---(:T5)--------|string|-------+
| |
+---(:T6)--------|string|-------+
| |
+---(:T7)--------|string|-------+
(*) necessary when the default owner is not set
(**) only available when :OWNER is a view or a sketch
- :GO :OK is necessary for setting the owner of the symbol.
- :OWNER specifies the owner of the symbol using the AM_GEO_SET_DOMAIN subaction.
- :REFLINE specifies a reference line to lead from the last-placed
symbol to a target element in the drawing using the AM_CREATE_REFLINE_IR
subaction.
- :SHAPE specifies the base shape of the welding symbol.
- :POSITION specifies the orientation of the welding symbol.
- :GEOM_VAR specifies seven geometric variables (:G1 to :G7).
- :TEXT_VAR specifies seven text variables (:T1 to :T7).
Use this action to create a welding symbol on a drawing.
AM_GEO_SET_DOMAIN interrupt action,
AM_CREATE_REFLINE_IR interrupt action