CoCreate OneSpace Designer - Commands Reference Manual

BORE machines a part by sweeping a profile about an axis, removing material from the part.

Syntax

             +----------------------<---------------------+
             |                                            |
---->(BORE)--+--(:PARTS)--|parts|--------------------->---+---->
             |                                            |
             +--(:WP)--|wp|--------------------------->---+
             |                                            |
             +--(:AXIS)--|MEAS_AXIS_3D_SA|------------>---+
             |                                            |
             +--(:ROTATION_ANGLE)--|MEAS_ANGLE_SA|---->---+
             |                                            |
             +--(:KEEP_WP)----+--(:YES)--+------------>---+
             |                |          |                |
             |                +--(:NO)---+                |
             |                                            |
             +--(:KEEP_PROFILE)--+--(:YES)--+-------------+
                                 |          |
                                 +--(:NO)---+

Options

• :PARTS - specifies the part to be bored, and the profile to be swept.
• :WP - specifies the workplane which will be swept.
• :AXIS - specifies the axis the profile will be swept around.
• :ROTATION_ANGLE - specifies the angle the profile will be swept through.
• :KEEP_WP - selects whether to keep the workplane containing the tool on completion of machining.
• :KEEP_PROFILE - selects whether to keep the profile(s) on completion of the bore operation. When set to :NO, the workplane is cleared of 2D geometry.

When to use

Example

1. Enter BORE, to display the option box used to provide information for the machining operations.
2. If necessary, enter the part name, workplane name, and angle of rotation. The default entries specify the active part and workplane, and a 360 degree angle of rotation.
3. Use the MEAS_AXIS_3D_SA subaction to specify the axis of rotation.
4. Choose whether to keep the workplane and/or profile on completion.
5. To complete the operation, click OK.

See also