CoCreate OneSpace Designer - Commands Reference Manual

STEP_IMPORT terminate action

STEP_IMPORT loads data saved in the STEP data exchange standard into OneSpace Designer, as defined in the ISO standard 10303.

Syntax


                    +------------<-----------------------<-------------------+
-->--(STEP_IMPORT)--|                                                        |
                    +--(:CHECK-PART)--+--(:YES)---+--------------------------+
                    |                 |           |                          |
                    |                 +--(:NO)----+                          |
                    |                                                        |
                    +--(:CONNECTED)--+--(:YES)---+---------------------------+
                    |                |           |                           |
                    |                +--(:NO)----+                           |
                    |                                                        |
                    +--(:CUSTOMER-ACCU)-----|accu.|--------------------------+
                    |                                                        |
                    +--(:FILEACCU)-------------------------------------------+
                    |                                                        |
                    +--(:FILENAME)----|file name|----------------------------+
                    |                                                        |
                    +--(:LOGFILE)-----|log file name|------------------------+
                    |                                                        |
                    +--(:SHOWLOG)--------------------------------------------+

Options

The following options are available to load 3D data in the STEP format into OneSpace Designer:

:CHECK-PART - switches on or off the body checking function.
:CONNECTED - specifies whether to connect face parts.
:CUSTOMER-ACCU - sets a value to use for the geometric accuracy.
:FILEACCU - specifies to use the accuracy of the file to be imported.
:FILENAME - specify the name of the STEP file to load.
:LOGFILE - specify the name of the log file into which to document the STEP translation.
:SHOWLOG - show logfile after import

When to use

Use this action to load 3D product data in the STEP format into OneSpace Designer.

Example

The following parameter sequence loads a STEP file into OneSpace Designer, using the accuracy of the STEP file.

STEP_IMPORT :CHECK-PART : YES :CONNECTED :YES :FILEACCU :YES :FILENAME [enter filename] :LOGFILE [enter log filename]