CoCreate OneSpace Designer - Commands Reference Manual

REFLECT_3D terminate action

REFLECT_3D does the following operations in one step:

Makes a copy
Mirrors the copy
Unites the copy with the original

Syntax


--->(REFLECT_3D)-+---<--------------------------------------------+
                 |                                                |
                 +---(:PARTS)--------------|sel-part|------------>+
                 |                                                |
                 +---(:REFLECT_PLANE)------|measure_axis_3d_sa|---+
                 |                                                |
                 +---(:BOTH_SIDES)----+---(:ON)---+---------------+
                                      |           |
                                      +--(:OFF)---+

Options

:PARTS - list of parts to be reflected
:REFLECT_PLANE - specifies the plane about which parts are reflected (same as in mirror).
:BOTH_SIDES - has the options:
- :ON - material on both sides of the reflect-plane is mirrored and united.
- :OFF - the parts are cut at the reflect-plane and only the part facing away from the normal to the reflect-plane is copied and united.

When to use

Use this action when you want to copy and unite parts.

Example

This example copies "PartA", and then mirrors and unites material on both sides of the reflect-plane.

REFLECT_3D "/partA" :BOTH_SIDES :ON

All part names must be enclosed by double quotes (" ").