CoCreate OneSpace Designer - Commands Reference Manual

IMPRINT_INTERSECTION terminate action

IMPRINT_INTERSECTION creates edges on the surfaces of a blank part corresponding to its interface with a specified tool.

Syntax


                           +--------------<--------------------------+
                           |                                         |
-->(IMPRINT_INTERSECTION)--+--(:IMPRINT_BLANKS)--------|blank(s)|----+-->
                           |                                         |
                           +--(:IMPRINT_TOOLS)---------|tool(s)|-----+
                           |                                         |
                           +--(:IMPRINT_KEEP_TOOL)--+--(:OFF)--+-----+
                                                    |          |
                                                    +--(:ON)---+

Options

The following options are available to imprint edges onto a blank part.

:IMPRINT_BLANKS - selects the blank part. You can use the Part Browser or Select Container to define the part.
:IMPRINT_TOOLS - specifies the tool parts you want to use.
:IMPRINT_KEEP_TOOL - specifies whether or not to keep the tool after use.

When to use

The default Imprint Intersection control box is displayed:

Blanks:
Tools:
[ ] Keep Tool

Use this action to create edges on a blank corresponding to its intersection with a tool.

Example