CoCreate OneSpace Designer - Commands Reference Manual

DA_MODIFY_FACE_PRESSURE modifies the force value of applied face pressure on a part.

Syntax

*1* - The variable LBC is not visible for the user.  It is the variable
which is set when the dialog is called.  It is the LBC to be modified.

-->(DA_MODIFY_FACE_PRESSURE)---+
                               |
     +-------------------------+
     |
     +-----+--+--(:LBC)--------|SELECT S_FERRUM_STUDY_DATA|--(*1*)--+-->
           |  |                                                     |
           |  +--(:STUDY)------|SELECT S_FERRUM_STUDY|--------------+
           |  |                                                     |
           |  +--(:NAME)-------|string|-----------------------------+
           |  |                                                     |
           |  +--(:REF_ELEM)---|face|-------------------------------+
           ^  |                                                     |
           |  +--(:VALUE)------|force per unit area|----------------+
           |  |                                                     |
           |  +--(:TOTAL_VALUE)--|total force|----------------------+
           |                                                        |
           +-------<-----------<----------<---------<-----------<---+

Options

• :LBC - specifies the LBC associated with the pressure.
• :STUDY - specifies the name of the associated study for the face pressure.
• :NAME - specifies the name of the face pressure to modify.
• :REF_ELEM - specifies the face element with the face pressure to modify.
• :VALUE - specifies the pressure value per unit area on the face.
• :TOTAL_VALUE - specifies the total pressure value distributed over the face.

All input strings must be enclosed by double quotes (" ").

When to use

Example

See also