CoCreate OneSpace Designer - Commands Reference Manual

Syntax

*6* - only if :DA_TABULAR is set to :ON

-->DA_MODIFY_CONVECTION_FACE--+
                              |
+-----------------------------+
|
+---+--+--(:LBC)------------------|SELECT S_FERRUM_CONVECTION|--(*1*)--+-->
    |  |                                                               |
    |  +--(:STUDY)----------------|SELECT S_FERRUM_STUDY|--------------+
    |  |                                                               |
    |  +--(:NAME)-----------------|string|-----------------------------+
    |  |                                                               |
    |  +--(:REF-ELEM)-------------|face|-------------------------------+
    |  |                                                               |
    |  +--(:AMBIENT_TEMPERATURE)--|temperature|------------------------+
    |  |                                                               |
    |  +--(:TEMPERATURE)----------|temperature|-----------------(*6*)--+
    |  |                                                               |
    |  +--(:TEMP_INCREMENT)-------|temperature-diff|------------(*6*)--+
    |  |                                                               |
    |  +--(:VALUE)----------------|filmcoeff|--------------------------+
    |  |                                                               |
    |  +--(:FACTOR)---------------|number|----------------------(*6*)--+
    ^  |                                                               |
    |  +--(:DELETE_ENTRY)---------------------------------------(*6*)--+
    |  |                                                               |
    |  +--(:SET_ENTRY)------------------------------------------(*6*)--+
    |  |                                                               |
    |  +--(:EVALUATE)-------------------------------------------(*6*)--+
    |  |                                                               |
    |  +--(:DA_TABULAR)----------------+--(:ON)---+--------------------+
    |                                  |          |                    |
    |                                  +--(:OFF)--+                    |
    |                                                                  |
    +-------<-----------<----------<---------<-----------<---------<---+

Options

• :STUDY - specifies the associated study for the convection.
• :NAME - specifies the name of the convection to modify.
• :REF_ELEM - specifies the part to apply the convection value.
• :AMBIENT_TEMPERATURE - specifies a value for the ambient temperature.
• :TEMPERATURE - specifies the part temperature.
• :TEMP_INCREMENT - specifies the temperature increments.
• :VALUE - specifies a heat generation value to be applied to the part.
• :FACTOR - specifies the incremental factor to be used.
• :DELETE_ENTRY - deletes an entry.
• :SET_ENTRY - sets an entry in the table.
• :EVALUATE - evaluates the heatflow using the temperature value and the factor.
• :DA_TABULAR - when set to ON, temperature-dependent convections can be entered.

When to use