CoCreate OneSpace Designer - Commands Reference Manual

DA_GRAVITY applies a gravitational force on a part.

Syntax

-->DA_GRAVITY-------+
                    |
+-------------------+
|
+---+--+--(:STUDY)------|SELECT S_FERRUM_STUDY|-------------+-->
    |  |                                                    |
    |  +--(:NAME)-------|string|----------------------------+
    |  |                                                    |
    |  +--(:VALUE)------|gravity|---------------------------+
    |  |                                                    |
    |  +--(:COORD1)-----|gravity|---------------------------+
    ^  |                                                    |
    |  +--(:COORD2)-----|gravity|---------------------------+
    |  |                                                    |
    |  +--(:COORD3)-----|gravity|---------------------------+
    |  |                                                    |
    |  +--(:DIRECTION)--|MEASURE_DIR_3D_SA|-----------------+
    |  |                                                    |
    |  |                      +--(:GLOBAL)--------+         |
    ^  |                      |                   |         |
    |  +--(:DA_COORD_SYSTEM)--+--(:LOCAL)---------+---------+
    |  |                                                    |
    |  +--(:SEL-CS)-----|SELECT S_WORKPLANE|----------------+
    |                                                       |
    +-------<-----------<----------<---------<-----------<--+

Options

• :STUDY - specifies the associated study to apply gravity forces.
• :NAME - specifies the name of the gravity force.
• :VALUE - specifies a gravity value to apply to the part.
• :COORD1 - specifies the force value acting on the edge along the first axis.
• :COORD2 - specifies the force value acting on the edge along the second axis.
• :COORD3 - specifies the force value acting on the edge along the third axis
• :DIRECTION - enables specification of the direction of the force.
• :GLOBAL - selects the global coordinate system.
• :DA_COORD_SYSTEM - enables specification of the referential coordinate system.
• :LOCAL - selects a local coordinate system.
• :SEL-CS - specifies the reference workplane for the local and cylindrical coordinate systems.

When to use