CoCreate OneSpace Designer - Commands Reference Manual

DA_FIXED_TEMP_EDGE terminate action

DA_FIXED_TEMP_EDGE applies a fixed temperature to an edge on a part.

Syntax


-->DA_FIXED_TEMP_EDGE--+
                       |
+----------------------+
|
+---+--+--(:STUDY)------|SELECT S_FERRUM_STUDY|-------------+-->
    |  |                                                    |
    |  +--(:NAME)-------|string|----------------------------+
    |  |                                                    |
    |  +--(:REF-ELEM)---|edge|------------------------------+
    ^  |                                                    |
    |  +--(:VALUE)------|temperature|-----------------------+
    |  |                                                    |
    |  +--(:NEXT)-------------------------------------------+
    |                                                       |
    +-------<-----------<----------<---------<-----------<--+

Options

The following options are available to configure and perform a finite element analysis of a part.

:STUDY - specifies the associated study for the edge temperature.
:NAME - specifies the name of the edge temperature to create.
:REF_ELEM - specifies the edge element to apply the temperature.
:VALUE - specifies a temperature value to be applied to the edge.
:NEXT - accepts the parameters you have defined and allows you to define the next parameter to apply.

When to use

Use this action when placing fixed temperatures on a part with Design Integrity.