CoCreate OneSpace Designer - Commands Reference Manual

DA_DISPLACEMENT_EDGE sets an enforced displacement on an edge on a part.

Syntax

-->(DA_DISPLACEMENT_EDGE)--+
                           |
     +---------------------+
     |
     +-----+--+--(:STUDY)------|SELECT S_FERRUM_STUDY|--------+-->
           |  |                                               |
           |  +--(:NAME)-------|string|-----------------------+
           |  |                                               |
           |  +--(:REF_ELEM)---|edge|-------------------------+
           ^  |                                               |
           |  +--(:VALUE)------|length|-----------------------+
           |  |                                               |
           |  +--(:COORD1)-----|length|-----------------------+
           |  |                                               |
           |  +--(:COORD2)-----|length|-----------------------+
           |  |                                               |
           |  +--(:COORD3)-----|length|-----------------------+
           |  |                                               |
           |  +--(:DIRECTION)--|MEASURE_DIR_3D_SA|------------+
           |  |                                               |
           |  |                      +--(:GLOBAL)--------+    |
           ^  |                      |                   |    |
           |  +--(:DA_COORD_SYSTEM)--+--(:LOCAL)---------+----+
           |  |                      |                   |    |
           |  |                      +--(:CYLINDRICAL)---+    |
           |  |                                               |
           |  +--(:SEL_CS)-----|SELECT S_WORKPLANE|-----------+
           |  |                                               |
           |  +--(:NEXT)--------------------------------------+
           |                                                  |
           +-------<-----------<----------<---------<---------+

Options

• :STUDY - specifies the study for the enforced displacement.
• :NAME - specifies the name of the enforced displacement to apply.
• :REF_ELEM - specifies the edge element to apply the enforced displacement.
• :VALUE - specifies the length of the displacement.
• :COORD1 - sets the length of the displacement in the first axis.
• :COORD2 - sets the length of the displacement in the second axis.
• :COORD3 - sets the length of the displacement in the third axis.
• :DIRECTION - enables specification of the direction of the displacement.
• :DA_COORD_SYSTEM - enables specification of the referential coordinate system.
• :GLOBAL - selects the global coordinate system.
• :LOCAL - selects a local coordinate system.
• :CYLINDRICAL - selects a cylindrical coordinate system.
• :SEL_CS - specifies the reference workplane for the local and cylindrical coordinate systems.
• :NEXT - accepts the parameters for the displacement, creates it, and allows you to define the next enforced displacement to apply.

All input strings must be enclosed by double quotes (" ").

When to use

Example

See also