CoCreate OneSpace Designer - Commands Reference Manual

AM_DIM_CON_TOLERANCE terminate action

AM_DIM_CON_TOLERANCE converts tolerances in existing dimensions.

Syntax


                               +-------------------<----------------+
                               |                                    |
                               |                                    |
---->(AM_DIM_CON_TOLERANCE)----+---(:DIM_LIST)-------|select dim|---+----->
                               |                                    |
                               |                                    |
                   +---(:TOL_TYPE)---+---(:TOL_LIMIT)---+
                                     |                  |
                                                 +---(:TOL_UL)------+
                                     |                  |
                                                 +---(:TOL_PM)------+

Options

:DIM_LIST specifies the dimension to modify. This can be used with the Select tool for multiple selection of dimensions.
:TOL_TYPE specifies the type of tolerance to which to convert the tolerances of the selected dimensions:
- :TOL_LIMIT converts to limit tolerancing.
- :TOL_UL converts to upper/lower tolerancing.
- :TOL_PM converts to plus/minus tolerancing.

When to use

Use this action to convert the tolerance of an existing dimension to a different type of tolerance.

Note
Limit and upper/lower tolerances can only be converted to the plus/minus tolerance type when they are symmetric. For example, a dimension with upper and lower tolerance values of +1 and -1 can be converted to 1, but tolerance values of +2 and -1 cannot be converted.

CoCreate OneSpace Designer - Commands Reference Manual

AM_DIM_CON_TOLERANCE terminate action

Syntax

Options

When to use

See also