CoCreate OneSpace Designer - Commands Reference Manual

AM_GEO_C_LINE_PNT_ANG creates an infinite construction line by point and angle.

Syntax

                                         +-----------------------------<---------------------+
                                         |                                                   |
                                         |                                                   |
---->(AM_GEO_C_LINE_PNT_ANG)--(:GO :OK)--+(*)---(:OWNER)---|AM_GEO_SET_DOMAIN|---(:GO :OK)---+---->
                                         |                                                   |
                                         |                                                   |
                                         |                  +-------<-------+                |
                                         |                  |               |                |
                                         +----|base pnt|----+----|angle|----+----------------+
                                                            |               |
                                                            +----|pnt2|-----+

                              (*) necessary when the default owner is not set

Options

• :GO :OK is necessary for setting the owner of the geometry.
• :OWNER specifies the owner of the geometry using the AM_GEO_SET_DOMAIN subaction.

Specify a base point and an angle from the positive x-axis.

When to use

See also