CoCreate OneSpace Designer - Commands Reference Manual

AM_GEO_C_LINE_BISECT creates an infinite construction line bisecting two points.

Syntax

                                        +------------------------<--------------------------+
                                        |                                                   |
                                        |                                                   |
---->(AM_GEO_C_LINE_BISECT)--(:GO :OK)--+(*)---(:OWNER)---|AM_GEO_SET_DOMAIN|---(:GO :OK)---+---->
                                        |                                                   |
                                        |                                                   |
                                        +------------+----|pnt1|----|pnt2|------------------+
                                        |            |
                                        +--|factor|--+

                             (*) necessary when the default owner is not set

Options

• :GO :OK is necessary for setting the owner of the geometry.
• :OWNER specifies the owner of the geometry using the AM_GEO_SET_DOMAIN subaction.

Specify two points to bisect, or first enter a bisection factor between 0 and 1. (The default factor is 0.5.)

When to use

See also