[Contents] [Index] [Books]

CoCreate OneSpace Designer - Commands Reference Manual

All rights reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under copyright laws.

Legal Notices

Restricted Rights Legend

Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Software clause in DFARS 252.227-7013. Rights for non-DOD U.S. Government Departments and Agencies are as set forth in FAR 52.227-19 (c) (1,2).

  CoCreate Software Inc.
  3801 Automation Way #110
  Fort Collins, CO 80525 U.S.A.

Notice

The information contained in this document is subject to change without notice. CoCreate makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. CoCreate shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Warranty

A copy of the specific warranty terms applicable to your CoCreate product and replacement parts can be obtained from your local Sales and Service Office.

UNIX® is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited.

History

New editions of this online manual will incorporate all material updated since the previous edition.

The manual publishing date indicates its current edition. The date changes when a new edition is published. (Minor corrections incorporated at republishing do not cause the date to change).

Edition 1, February 1993
Edition 2, October 1993
Edition 3, April 1994
Edition 4, November 1994
Edition 5, December 1995
Edition 6, October 1996
Edition 7, September 1997
Edition 8, May 1998

Introduction

OneSpace Designer is a versatile and highly interactive 3D design modeling system for accelerating the geometric design process, and reducing overall product development time. OneSpace Designer provides fast and accurate methods to design real-world parts and assemblies from inception through to detailed design.

Use this Manual in conjunction with the OneSpace Designer User's Task Guide, OneSpace Designer Concepts Guide, Sheet Metal Concepts and User's Guide and the OneSpace Designer MentorGraphics PCB I/F System and User's Manual to produce efficient programs.

About this manual

The purpose of this manual is to provide the programmer with detailed information about the commands and functions of OneSpace Designer.

The OneSpace Designer Commands Reference Manual contains an introductory section, and for each action a single document. These huge amount of documents comprises all actions used to execute the operations of OneSpace Designer and its modules by way of the command line. The following sections are covered within the Command Reference Manual:

The sections are titled:

  1. Introduction to Using Command Syntax,
  2. OneSpace Designer Interrupt and Terminate Actions,
  3. OneSpace Designer "SET_" Actions,
  4. OneSpace Designer Subactions,
  5. IDF Data Adapter (PCB I/F) Actions,
  6. Sheet Metal Actions,
  7. Machining Actions,
  8. Annotation Actions, and
  9. Design Integrity Actions.
These sections are accessible either through the Table of Contents or through the Index of the Command Reference Manual.

These sections describe how to use the OneSpace Designer action commands to develop a complete geometric model, including design information. A syntax diagram accompanies each action description, and where appropriate, a short example is provided.

[Contents] [Index] [Books]