CoCreate OneSpace Designer - Commands Reference Manual

DA_MODIFY_HEAT_GENERATION modifies the heat generation of a part.

Syntax

*6* - only if :DA_TABULAR is set to :ON

-->DA_MODIFY_HEAT_GENERATION--+
                              |
+-----------------------------+
|
+---+--+-----(:LBC)-------------|SELECT S_FERRUM_HEAT_GEN|--(*1*)--+-->
    |  |                                                           |
    |  +-----(:STUDY)-----------|SELECT S_FERRUM_STUDY|------------+
    |  |                                                           |
    |  +-----(:NAME)------------|string|---------------------------+
    |  |                                                           |
    |  +-----(:REF-ELEM)--------|part|-----------------------------+
    |  |                                                           |
    |  +-----(:TEMPERATURE)-----|temperature|---------------(*6*)--+
    |  |                                                           |
    |  +-----(:TEMP_INCREMENT)--|temperature-diff|----------(*6*)--+
    |  |                                                           |
    |  +-----(:VALUE)-----------|vol heatflow|---------------------+
    |  |                                                           |
    |  +-----(:FACTOR)----------|number|--------------------(*6*)--+
    ^  |                                                           |
    |  +-----(:TOTAL-VALUE)-----|heatflow|-------------------------+
    |  |                                                           |
    |  +-----(:DELETE_ENTRY)--------------------------------(*6*)--+
    |  |                                                           |
    |  +-----(:SET_ENTRY)-----------------------------------(*6*)--+
    |  |                                                           |
    |  +-----(:EVALUATE)------------------------------------(*6*)--+
    |  |                                                           |
    |  +-----(:DA_TABULAR)----------------+--(:ON)---+-------------+
    |                                     |          |             |
    |                                     +--(:OFF)--+             |
    |                                                              |
    +-------<-----------<----------<---------<-----------<---------+

Options

• :LBC - specifies the LBC associated with the heat generation.
• :STUDY - specifies the associated study for the heat generation.
• :NAME - specifies the name of the heat generation to modify.
• :REF_ELEM - specifies the part to apply the heat generation value.
• :TEMPERATURE - specifies the part temperature.
• :TEMP_INCREMENT - specifies the temperature increments.
• :VALUE - specifies a heat generation value to be applied to the part.
• :FACTOR - specifies the incremental factor to be used.
• :TOTAL-VALUE - specifies a total value to be applied to the part.
• :DELETE_ENTRY - deletes an entry.
• :SET_ENTRY - sets an entry in the heat generation table.
• :EVALUATE - evaluates the heatflow using the temperature value and the factor.
• :DA_TABULAR - when set to ON, temperature-dependent heatflows can be entered.

When to use