CoCreate OneSpace Designer - Commands Reference Manual

DA_MODIFY_EDGE_DISPL modifies an enforced displacement on an edge on a part.

Syntax

*1* - The variable LBC is not visible for the user.  It is the variable
which is set when the dialog is called.  It is the LBC to be modified.

-->(DA_MODIFY_EDGE_DISPL)-----+
                              |
      +-----------------------+
      |
      +-----+--+--(:LBC)--------|SELECT S_FERRUM_STUDY_DATA|--(*1*)--+-->
            |  |                                                     |
            |  +--(:STUDY)------|SELECT S_FERRUM_STUDY|--------------+
            |  |                                                     |
            |  +--(:NAME)-------|string|-----------------------------+
            |  |                                                     |
            |  +--(:REF_ELEM)---|edge|-------------------------------+
            ^  |                                                     |
            |  +--(:VALUE)------|length|-----------------------------+
            |  |                                                     |
            |  +--(:COORD1)-----|length|-----------------------------+
            |  |                                                     |
            |  +--(:COORD2)-----|length|-----------------------------+
            |  |                                                     |
            |  +--(:COORD3)-----|length|-----------------------------+
            |  |                                                     |
            |  +--(:DIRECTION)--|MEASURE_DIR_3D_SA|------------------+
            |  |                                                     |
            |  |                      +--(:GLOBAL)--------+          |
            ^  |                      |                   |          |
            |  +--(:DA_COORD_SYSTEM)--+--(:LOCAL)---------+----------+
            |  |                      |                   |          |
            |  |                      +--(:CYLINDRICAL)---+          |
            |  |                                                     |
            |  +--(:SEL_CS)-----|SELECT S_WORKPLANE|-----------------+
            |                                                        |
            +-------<-----------<----------<---------<-----------<---+

Options

• :STUDY - specifies the study for the enforced displacement.
• :NAME - specifies the name of the enforced displacement to modify.
• :REF_ELEM - specifies the edge element with the enforced displacement to modify.
• :VALUE - specifies the length of the displacement.
• :COORD1 - sets the length of the displacement in the first axis.
• :COORD2 - sets the length of the displacement in the second axis.
• :COORD3 - sets the length of the displacement in the third axis.
• :DIRECTION - enables specification of the direction of the displacement.
• :DA_COORD_SYSTEM - enables specification of the referential coordinate system.
• :GLOBAL - selects the global coordinate system.
• :LOCAL - selects a local coordinate system.
• :CYLINDRICAL - selects a cylindrical coordinate system.
• :SEL_CS - specifies the reference workplane for the local and cylindrical coordinate systems.

All input strings must be enclosed by double quotes (" ").

When to use

Example

See also