DA_MECH_DERIVED_UNITS enables modification of specific individual mechanical units of measure for the session environment.
-->DA_MECH_DERIVED_UNITS--------+
|
+-------------------------------+
|
+---+---+--(:DA_STRESS)-----------+--(:MEGA_PASCAL)-------------+---+-->
| | | | |
| | +--(:PASCAL)------------------+ |
| | | | |
| | +--(:NEWTON_PER_MILLIMETER2)--+ |
| | | | |
| | +--(:PSI)---------------------+ |
^ | | | |
| | +--(:DERIVED)-----------------+ |
| | |
| +--(:DA_STRESS_FACTOR)-------|number|-----------------------+
| | |
| +--(:DA_DENSITY)----------+--(:KILOGRAM_PER_M3)---------+---+
| | | | |
| | +--(:GRAM_PER_CENTIMETER3)----+ |
| | | | |
| | +--(:TON_PER_M3)--------------+ |
| | | | |
| | +--(:POUND_PER_INCH3)---------+ |
| | | | |
^ | +--(:SLUG_PER_FOOT3)----------+ |
| | | | |
| | +--(:DERIVED)-----------------+ |
| | |
| +--(:DA_DENSITY_FACTOR)------|number|-----------------------+
| | |
| +--(:DA_FORCE)------------+--(:NEWTON)------------------+---+
| | | | |
| | +--(:POUNDFORCE)--------------+ |
| | | | |
| | +--(:POUNDEL)-----------------+ |
| | | | |
| | +--(:KIP)---------------------+ |
^ | | | |
| | +--(:BRITISHTON)--------------+ |
| | | | |
| | +--(:METRICTON)---------------+ |
| | | | |
| | +--(:DYNE)--------------------+ |
| | | | |
| | +--(:KILOGRAMFORCE)-----------+ |
| | | | |
| | +--(:DERIVED)-----------------+ |
| | |
| +--(:DA_FORCE_FACTOR)--------|number|-----------------------+
^ | |
| +--(:DA_MOMENT)-----------+--(:NEWTON_METER)------------+---+
| | | | |
| | +--(:NEWTON_MILLIMETER)-------+ |
| | | | |
| | +--(:DYNE_CENTIMETER)---------+ |
| | | | |
| | +--(:KILONEWTON_METER)--------+ |
| | | | |
| | +--(:POUND_FOOT)--------------+ |
| | | | |
| | +--(:POUND_INCH)--------------+ |
^ | | | |
| | +--(:DERIVED)-----------------+ |
| | |
| +--(:DA_MOMENT_FACTOR)-------|number|-----------------------+
| | |
| +--(:DA_ENERGY)-----------+--(:JOULE)-------------------+---+
| | | | |
| | +--(:KILOJOULE)---------------+ |
| | | | |
| | +--(:CAL)---------------------+ |
| | | | |
| | +--(:KILOCAL)-----------------+ |
| | | | |
^ | +--(:FOOT_POUNDFORCE)---------+ |
| | | | |
| | +--(:INCH_POUNDFORCE)---------+ |
| | | | |
| | +--(:DERIVED)-----------------+ |
| | |
| +--(:DA_ENERGY_FACTOR)-------|number|-----------------------+
| | |
| +--(:DA_PRESSURE)---------+--(:NEWTON_PER_M2)-----------+---+
| | | | |
| | +--(:BAR)---------------------+ |
| | | | |
| | +--(:DYNE_PER_CM2)------------+ |
| | | | |
^ | +--(:NEWTON_PER_MM2)----------+ |
| | | | |
| | +--(:POUNDFORCE_PER_FOOT2)----+ |
| | | | |
| | +--(:POUNDFORCE_PER_INCH2)----+ |
| | | | |
| | +--(:ATM)---------------------+ |
| | | | |
| | +--(:DERIVED)-----------------+ |
| | |
| +--(:DA_PRESSURE_FACTOR)-----|number|-----------------------|
| | |
| +--(:DA_VELOCITY)---------+--(:METER_PER_SECOND)--------+---+
| | | | |
| | +--(:KILOMETER_PER_HOUR)------+ |
^ | | | |
| | +--(:CENTIMETER_PER_SECOND)---+ |
| | | | |
| | +--(:MILLIMETER_PER_SECOND)---+ |
| | | | |
| | +--(:METER_PER_MINUTE)--------+ |
| | | | |
| | +--(:INCH_PER_SECOND)---------+ |
| | | | |
| | +--(:FOOT_PER_SECOND)---------+ |
| | | | |
| | +--(:MILES_PER_HOUR)----------+ |
| | | | |
^ | +--(:DERIVED)-----------------+ |
| | |
| +--(:DA_VELOCITY_FACTOR)-----|number|-----------------------+
| | |
| +--(:DA_ACCELERATION)-----+--(:NEWTON_PER_KILOGRAM)-----+---+
| | | | |
| | +--(:METER_PER_SECOND2)-------+ |
| | | | |
| | +--(:INCH_PER_SECOND2)--------+ |
| | | | |
| | +--(:FOOT_PER_SECOND2)--------+ |
| | | | |
| | +--(:DERIVED)-----------------+ |
^ | |
| +--(:DA_ACCELERATION_FACTOR)----|number|--------------------+
| | |
| +--(:DA_FREQUENCY)--------+--(:HERTZ)-------------------+---+
| | | | |
| | +--(:KILOHERTZ)---------------+ |
| | | | |
| | +--(:MEGAHERTZ)---------------+ |
| | | | |
| | +--(:DERIVED)-----------------+ |
| | |
| +--(:DA_FREQUENCY_FACTOR)----|number|-----------------------+
| |
+------------<---------<-------<-----------<------------<-------+
The following options are available to modify units of measurement in the session environment.
-
:DA_DENSITY - enables selection of units of density.
-
:KILOGRAM_PER_M3 - selects kilograms per cubic meter as the basic unit of density.
-
:GRAM_PER_CENTIMETER3 - selects grams per cubic centimeter as the basic unit of density.
-
:TON_PER_M3 - selects tons per cubic meter as the basic unit of density.
-
:POUND_PER_INCH3 - selects pounds per cubic inch as the basic unit of density.
-
:SLUG_PER_FOOT3 - selects slugs per cubic foot as the basic unit of density.
-
:DERIVED - sets the specific unit as automatically derived from the global unit system.
-
:DA_DENSITY_FACTOR - enables declaration of a multiplier for units of density.
-
:DA_FORCE - enables selection of units of force.
-
:NEWTON - specifies a newton as the basic unit of force.
-
:POUNDFORCE - specifies a pound as the basic unit of force.
-
:POUNDAL - specifies a poundal as the basic unit of force.
-
:KIP - specifies a kilopound as the basic unit of force.
-
:BRITISHTON - specifies a British ton as the basic unit of force.
-
:METRICTON - specifies a metric ton as the basic unit of force.
-
:DYNE - specifies a dyne as the basic unit of force.
-
:KILOGRAMFORCE - specifies a kilogram as the basic unit of force.
-
:DA_FORCE_FACTOR - enables declaration of a multiplier for units of force.
-
:DA_MOMENT - enables selection of units of moment.
-
:NEWTON_METER - specifies a newton meter as the basic unit of moment.
-
:NEWTON_MILLIMETER - specifies a newton millimeter as the basic unit of moment.
-
:DYNE_CENTIMETER - specifies a dyne centimeter as the basic unit of moment.
-
:KILONEWTON_METER - specifies a kilonewton meter as the basic unit of moment.
-
:POUND_FOOT - specifies a pound-foot as the basic unit of moment.
-
:POUND_INCH - specifies a pound-inch as the basic unit of moment.
-
:DA_MOMENT_FACTOR - enables declaration of a multiplier for units of moment.
-
:DA_VELOCITY - enables selection of units of velocity.
-
:METER_PER_SECOND - specifies meters per second as the basic unit of velocity.
-
:KILOMETER_PER_HOUR - specifies kilometers per hour as the basic unit of velocity.
-
:CENTIMETER_PER_SECOND - specifies centimeters per second as the basic unit of velocity.
-
:MILLIMETER_PER_SECOND - specifies millimeters per second as the basic unit of velocity.
-
:METER_PER_MINUTE - specifies meters per minute as the basic unit of velocity.
-
:INCH_PER_SECOND - specifies inches per second as the basic unit of velocity.
-
:FOOT_PER_SECOND - specifies feet per second as the basic unit of velocity.
-
:MILES_PER_HOUR - specifies meters per second as the basic unit of velocity.
-
:DA_VELOCITY_FACTOR - enables declaration of a multiplier for units of velocity.
-
:DA_FREQUENCY - enables selection of units of frequency.
-
:HERTZ - specifies hertz as the basic unit of frequency.
-
:KILOHERTZ - specifies kilohertz as the basic unit of frequency.
-
:MEGAHERTZ - specifies megahertz as the basic unit of frequency.
-
:DA_FREQUENCY_FACTOR - enables declaration of a multiplier for units of frequency.
-
:DA_ENERGY - enables selection of units of energy.
-
:JOULE - specifies joules as the basic unit of energy.
-
:KILOJOULE - specifies kilojoules as the basic unit of energy.
-
:CAL - specifies calories as the basic unit of energy.
-
:KILOCAL - specifies kilocalories as the basic unit of energy.
-
:FOOT_POUNDFORCE - specifies foot-pounds as the basic unit of energy.
-
:INCH_POUNDFORCE - specifies inch-pounds as the basic unit of energy.
-
:BTU - specifies British Thermal Integrity Unit as the basic unit of energy.
-
:DA_ENERGY_FACTOR - enables declaration of a multiplier for units of energy.
-
:DA_PRESSURE - enables selection of units of pressure.
-
:NEWTON_PER_M2 - specifies newtons per square meter as the basic unit of pressure.
-
:BAR - specifies bars as the basic unit of pressure.
-
:DYNE_PER_CM2 - specifies dynes per square centimeter as the basic unit of pressure.
-
:NEWTON_PER_MM2 - specifies newtons per square millimeter as the basic unit of pressure.
-
:POUNDFORCE_PER_FOOT2 - specifies pounds per square foot as the basic unit of pressure.
-
:POUNDFORCE_PER_INCH2 - specifies pounds per square inch as the basic unit of pressure.
-
:ATM - specifies atmospheres as the basic unit of pressure.
-
:DA_PRESSURE_FACTOR - enables declaration of a multiplier for units of pressure.
-
:DA_HEATFLOW - enables selection of units of heatflow.
-
:JOULE_PER_SECOND - specifies joules per second as the basic unit of heatflow.
-
:KILOJOULE_PER_SECOND - specifies kilojoules per second as the basic unit of heatflow.
-
:CAL_PER_SECOND - specifies calories per second as the basic unit of heatflow.
-
:KILOCAL_PER_SECOND - specifies kilocalories per second as the basic unit of heatflow.
-
:BTU_PER_SECOND - specifies BTUs per second as the basic unit of heatflow.
-
:FOOT_POUNDFORCE_PER_SECOND - specifies foot-pounds per second as the basic unit of heatflow.
-
:INCH_POUNDFORCE_PER_SECOND - specifies inch-pounds per second as the basic unit of heatflow.
-
:DA_HEATFLOW_FACTOR - enables declaration of a multiplier for units of heatflow.
-
:DA_HEATFLUX - enables selection of units of heatflux.
-
:WATT_PER_M2 - specifies watts per square meter as the basic unit of heatflux.
-
:MILLIWATT_PER_M2 - specifies milliwatts per square meter as the basic unit of heatflux.
-
:KILOWATT_PER_M2 - specifies kilowatts per square meter as the basic unit of heatflux.
-
:FOOT_POUNDFORCE_PER_SECOND_FOOT2 - specifies foot-pounds per square foot per second as the basic unit of heatflux.
-
:INCH_POUNDFORCE_PER_SECOND_FOOT2 - specifies foot-pounds per square inch per second as the basic unit of heatflux.
-
:DA_HEATFLUX_FACTOR - enables declaration of a multiplier for units of heatflux.
-
:DA_THERMCOND - enables selection of units of thermal conductivity.
-
:WATT_PER_M_KELVIN - specifies watts per meter Kelvin as the basic unit of thermal conductivity.
-
:KILOWATT_PER_M_KELVIN - specifies kilowatts per meter Kelvin as the basic unit of thermal conductivity.
-
:BTU_PER_FOOT_HOUR_FAHRENHEIT - specifies BTUs per foot hour Fahrenheit as the basic unit of thermal conductivity.
-
:FOOT_POUNDFORCE_PER_SECOND_FOOT_FAHRENHEIT - specifies foot-pounds per second per foot Fahrenheit as the basic unit of thermal conductivity.
-
:INCH_POUNDFORCE_PER_SECOND_INCH_FAHRENHEIT - specifies inch-pounds per second per inch Fahrenheit as the basic unit of thermal conductivity.
-
:DA_THERMCOND_FACTOR - enables declaration of a multiplier for units of thermal conductivity.
-
:DA_SPECIFIC_HEAT - enables selection of units of specific heat.
-
:JOULE_PER_KILOGRAM_KELVIN - specifies joules per kilogram Kelvin as the basic unit of specific heat.
-
:BTU_PER_POUND_FAHRENHEIT - specifies BTUs per pound Fahrenheit as the basic unit of specific heat.
-
:DA_SPECIFIC_HEAT_FACTOR - enables declaration of a multiplier for units of specific heat.
-
:DA_FILMCOEFF - enables selection of units for film coefficients.
-
:WATT_PER_M2_KELVIN - specifies watts per square meter Kelvin as the basic unit for film coefficients.
-
:KILOWATT_PER_M2_KELVIN - specifies kilowatts per square meter Kelvin as the basic unit for film coefficients.
-
:BTU_PER_FOOT2_HOUR_FAHRENHEIT - specifies BTUs per square foot hour Fahrenheit as the basic unit for film coefficients.
-
:FOOT_POUNDFORCE_PER_SECOND_FOOT2_FAHRENHEIT - specifies foot-pounds per second per square foot Fahrenheit as the basic unit for film coefficients.
-
:INCH_POUNDFORCE_PER_SECOND_INCH2_FAHRENHEIT - specifies inch-pounds per second per square inch Fahrenheit as the basic unit for film coefficients.
-
:DA_FILMCOEFF_FACTOR - enables declaration of a multiplier for units for film coefficients.
Use this action when modifying the session environment in Design Integrity.
DA_UNIT_SYSTEMS terminate action,
DA_BASIC_UNITS terminate action
![[Contents]](toc.gif)
![[Index]](index.gif)
![[Books]](books.gif)