CoCreate OneSpace Designer - Commands Reference Manual

AM_SKETCH_CREATE terminate action

AM_SKETCH_CREATE creates a new sketch on the drawing.

Syntax


                                    +---------------------------<-----------------------+
                                    |                                                   |
                                    |                                                   |
---->(AM_SKETCH_CREATE)--(:GO :OK)--+(*)---(:OWNER)---|AM_GEO_SET_DOMAIN|---(:GO :OK)---+----->
                                    |                                                   |
                                    |                                                   |
                                    +----(:SKETCH_NAME)----|text|-----------------------+
                                    |                                                   |
                                    |                                                   |
                                    +----(:REF_POINT)----|point|------------------------+

                      (*) necessary when the default owner is not set

Options

:GO :OK is necessary for setting the owner of the sketch.
:OWNER specifies the owner of the sketch using the AM_GEO_SET_DOMAIN subaction.
:SKETCH_NAME specifies the name of the new sketch.
:REF_POINT specifies the reference point (location) of the sketch on the sheet.

When to use

Use this action to create a new sketch on a drawing. This creates a sketch vertex point; the sketch can then be built up with geometry, for example.