|
• New queries automatically use the Volume-based tolerance calculation method.
• The old method of Penetration-based calculation is deprecated. Comparing reports generated using Penetration based calculation with the new Volume-based tolerance may show inaccurate results.
|
Interference Detection Type
|
Default Tolerance Value
|
Units (example)
|
---|---|---|
Interference
|
Tolerable Volume = 0
|
mm³
|
Contact
|
Tolerable Distance = 0
|
mm
|
Clearance
|
Required Clearance = 1
|
mm
|
• The tolerance value boxes match the interference detection type. • All values must be greater than or equal to 0. • The Required Clearance value must be greater than the Tolerable Distance value. • Input items can have specific Clearance values. See To Create Input Lists and Exclusion Lists for details. |
• If you compare results that were created with different environment variables you should ensure that the results are suitable for your use. • If the environment variable is set to contact, and only Interference is calculated, interferences that are not calculated are not reported. • Set the environment variable before running Creo View. |