|
On Windows, you can confirm the path and command used to run NX by right-clicking the NX icon and selecting Properties. The path and command to run NX appear in the Target text box.
|
|
• The adapter operates under a user account that must be configured to run NX.
• On Windows, do not use network drives for workers. For example, do not install the Creo View adapters onto a network drive, or rely on any other installation or data that resides on a network drive.
• When configured as a service using the Worker Daemon, the service’s Log On As account must also be configured to run NX.
• If you attempt to load CAD data into NX and have problems, those same problems will prevent the adapter from converting this data to the Creo View format.
|
|
NX CAD part containing 2D drawing and 3D geometry publishes the thumbnail for 2D drawing instead of 3D model. To publish 3D thumbnail instead of 2D thumbnail, complete the following steps:
1. Create a thumbnail generator recipe file using the recipe editor.
2. Add the recipe option adapter/treatModelAsPrimary=1 to the thumbnail generator recipe file you created.
3. Open the recipe editor ug2pv.rcp, and under > add the thumbnail recipe file to Thumbnail Recipe.
|