SolidWorks Output Option
|
Values
|
Description
|
---|---|---|
filetype
|
BINARY*
ASCII
|
Sets the output format of the STL file.
|
Units
|
<Integer Value>
Default value is 2.
|
See SolidWorks Unit Values table in Supported Output for SolidWorks for SAT.
|
Resolution
|
Coarse
Fine
Custom*
|
Controls the tessellation of non-planar surfaces for Stereolithography (STL) output.
|
DeviationTolerance
|
<Double Value>
Default value is 0.091.
|
Controls whole-part tessellation.
Lower numbers generate files with greater whole-part accuracy.
|
AngleTolerance
|
<Double Value>
Default value is 10.
|
Controls smaller detail tessellation.
Lower numbers generate files with greater small-detail accuracy, but those files take longer to generate.
|
TranslateData
|
Yes
No*
|
When set to Yes, exported parts maintain original position in global space, relative to origin.
|
AssemblyConfiguration
|
SingleFile
|
Publishes an assembly to one file.
|
MultipleFiles*
|
Publishes an assembly and its parts as multiple files.
|
|
InterferenceCheck
|
Yes
No*
|
When set to Yes, checks for interference prior to saving assembly document.
Valid only when Assembly Configuration is set to SingleFile.
|
OutputCoordinate System
|
<String Value, for the name of the transform coordinate system>
|
An empty string signifies that the default coordinate system that does not require a transform.
Coordinate settings are not saved with the document; they must be selected when publishing.
|