Parameter
|
Function
|
Description
|
---|---|---|
<1>
|
linetype
|
UseALL to apply the transformation to all the linetypes in the drawing.
Use SOLID, DASHED, LONG_DASHED, DOT_CENTER, DASH_CENTER, PHANTOM, CENTER_DASH_DASH, or DOTTED to apply the transformation to the defined linetypes in the drawing.
|
<2>
|
Color
|
UseALL to apply the transformation to all the colors in the drawing.
|
<3>
|
Pensize
|
UseALL to apply the transformation to all the pensizes in the drawing.
|
<4>
|
Target Linetype
|
If the new linetype is to be the same as the old linetype, useSAME.
Use SOLID, DASHED, LONG_DASHED, DOT_CENTER, DASH_CENTER, PHANTOM, CENTER_DASH_DASH, or DOTTED to perform the transformation to the defined linetypes.
|
<5>
|
Target Penwidth
|
Default is0.
|
<6>
|
Pen Number
|
Defines the Pen Number. This depends on your currentPLOT_TRANSFORMATION definition.
For Black and White output, the value is 1.
|
|
• Any linetype which is accepted by Creo Elements/Direct Drafting may be input as target linetype in parameter <4> in the above function.
• The penwidth may be varied by changing parameter <5> as shown above.
• You can copy-paste the above function to your .WSF file.
• For more information, see the following references:
◦ The “Printing and Plotting” chapter at the > in the Creo Elements/Direct Drafting 도움말 센터.
◦ The “Programming Reference Guide” which is accessible via the installed Creo Elements/Direct Drafting application under <CEDD>\locale\en\me_help\me_toc.htm and accessed through the CEDD Help ‘?’ icon.
|