To Set Scale and Position Defaults for Overlays
1. Click > > .
The Creo View Options dialog box opens to the PCB Layout Viewer-Overlays page.
2. To convert the scale for an overlay with a different unit of measurement, type a value in the Scale box.
3. To rotate the overlay, type or select an angle in the Rotation box.
4. To align the overlay origin to the design origin, type values in the X offset and Y offset boxes.
5. To flip the overlay, select one or both of these check boxes:
◦ On horizontal axis
◦ On vertical axis
6. Click OK. The defaults are set.