Authoring Application Name
|
Design File
|
Native ECAD Tool Required
|
Other Export Formats Supported by Creo View
|
Comments
|
---|---|---|---|---|
Creo Schematics
|
No
|
EDA
|
EDA exported files from Creo Schematics are supported by Creo View.
|
|
Altium Designer Layout — Versions 19.0 to 21.0
|
*.dsn
|
No
|
Gerber
ODB++
DSN
IDF
IPC-2581
Note that Layer side is incorrect for some layers in the *.cvg file.
|
Either export designs as a DSN or create a TGZ file in order to read into Creo View.
|
Altium Designer Schematic — Versions 19.0 to 21.0
|
*.dsnwrk
*.prjpcb
*.schdoc (ASCII file input)
|
No
|
Save each schematic sheet as an ASCII file.
|
|
Cadence Allegro Design Capture/Capture CIS — Version 17.4
|
*.dsn
|
IDF
DSN (Router)
ODB++
|
||
Cadence Allegro Design Entry HDL — Version 17.4
|
*.cpm
|
IDF
DSN (Router)
ODB++
|
||
Cadence Allegro Package Designer (APD) — Version 17.4
|
*.mcm
*.sip
|
When using APD, for the correct Allegro fonts to be displayed in Creo View viewables, you must have version 16.6 or later installed and licensed.
If you do not have the tool installed, an approximate font is substituted, and it may appear different from the original in these ways:
• Font size
• Text position
To view some pad shapes introduced in Cadence 17, you must have Hotfix_SPB17.00.002 installed.
For all other cases, the tool is not required.
|
IDF
DSN (Router)
ODB++
|
|
Cadence Allegro PCB Designer — Version 17.4
|
*.dra
*.mdd
*.bri
*.brd
|
When using Allegro PCB Designer, for the correct Allegro fonts to be displayed in Creo View viewables, you must have version 16.6 or later installed and licensed.
If you do not have the tool installed, an approximate font is substituted, and it may appear different from the original in these ways:
• Font size
• Text position
To view some pad shapes introduced in Cadence 17, you must have Hotfix_SPB17.00.002 installed.
For all other cases, the tool is not required.
|
IDF
DSN (Router)
ODB++
IPC-2581
|
|
Cadence Allegro System Capture — Version 17.4
|
*.cpm
|
IDF
DSN (Router)
ODB++
|
||
ECAD Schematics
|
No
|
EDA
|
You can save a design as an EDA file. See
Opening Files from Creo Schematics for information on supported functionality.
|
|
Mentor Graphics EDM — Versions VX.2.6 to VX.2.8
|
*.edx
|
No
|
EDM
|
Mentor EDM generates Creo View viewables for Mentor EDM containing one PCB Layout design and one Schematic design.
|
Mentor Graphics PADS Layout — Versions VX.2.6 to VX.2.8
|
*.pcb
|
Yes
|
ASC
DSN
IDF
ODB++
|
|
Mentor Graphics PADS Logic — Versions VX.2.6 to VX.2.8
|
*.edf
|
Third-party EDIF 200 writers required.
|
Customer needs to purchase the application from Elgris Technologies igor@elgris.com.
|
|
Mentor Graphics PADS Professional Layout — Versions VX.2.6 to VX.2.8
|
*.pcb
*.prj
|
Yes
|
GenCAD
Gerber
IDF
ODB++
|
Decryptdata.exe is required in expedition tools folder. This is available on the PTC support website as EE2007.x (EE7.x) Layout Interface.
|
Mentor Graphics PADS Professional Schematic — Versions VX.2.6 to VX.2.8
|
*.prj
|
Yes
|
EDS
|
|
Mentor Graphics xDX Designer — Versions VX.2.6 to VX.2.8
|
*.prj
|
Mentor Graphics Expedition must be installed.
|
EDS
|
|
Mentor Graphics Xpedition — Versions VX.2.6 to VX.2.8
|
*.pcb
*.prj
|
Interface for Mentor Graphics Expedition Enterprise 2007 is required. Mentor Graphics Expedition must be installed.
|
HKP
ODB++
IDF
Gerber
IPC-2581 revB
GenCAD
|
Decryptdata.exe is required in expedition tools folder. This is available on the PTC support website as EE2007.x (EE7.x) Layout Interface.
|
Zuken CR-5000 Board Designer — Versions v21 to v22
Zuken CR-8000 Board Designer — Version 2021.0
|
*.pcb
|
To view BMB files, the native ECAD tool is not required.
To generate intermediate BMB files, Zuken Board Designer must be installed.
|
IDF
BMB
IPC-2581
|
To open IDF files from Board Designer in Creo View, you must change the file extension from *.brd to *.bdf.
From Creo View 4.0, when synchronizing with a schematic design, the pin name is used. Previously the pin number was used, which is an internally generated number.
|
Zuken CR–5000 System Designer — Versions v21 to v23
|
*.cir directory (*.sht files)
|
Yes
|
EDIF 200
|
|
Zuken CR-8000 Design Force — Versions 2019.0 to 2021.0
|
*.dsgn
|
Yes
|
ODB++
IPC-2581
BMB
|
If the DESIGN TYPE attribute value is not available, the PART NAME is displayed instead.
|
Zuken CR-8000 Design Gateway — Versions 2019.0 to 2021.0
|
*.cir directory (*.sht files)
|
Yes
|
EDIF 200
|
File Type
|
Design Type
|
Extension
|
---|---|---|
CADIF
|
PCB Layout
|
*.paf
*.cdf
|
EDIF — version 2.0.0
|
Schematic
|
*.edf
*.eds
*.edi
|
ODB++
|
PCB Layout or Overlay
|
*.tar
*.z
*.tgz
*.gz
Matrix file
|
GenCAD
|
PCB Layout
|
*.cad
|
Gerber — versions 274X and 274D
|
PCB Layout or Overlay
|
*.art
*.gbr
*.pho
*.gdo
|
IDF—Board files only
|
ECAD-MCAD Collaboration
PCB Layout
|
*.emn
*.emp
*.idf
*.bdf
|
IDX
|
Baseline
|
*.idx
|
IFF
|
Schematic
|
*.iff
|
IPC-2581 RevA and RevB
|
PCB Layout
|
*.cvg
*.xml
|
SPECCTRA DSN
|
PCB Layout
|
*.dsn
|