To Set Bill of Materials Options
1. Click > .
The Creo View Options dialog box opens.
2. For MCAD: next to Showing, select Defaults, and then click > . For ECAD: next to Showing, select Defaults, and then click > or > .The options open on the right.
3. To add one or more columns to the list of defaults, select them in the Available Fields list, and then click Add. The columns are added to the Displayed Fields list.
4. To remove one or more columns from the list of defaults, select them in the list under Displayed Fields and click Remove. The columns are removed from the Displayed Fields list.
5. To reorder the columns, select a column in the
Displayed Fields list, and then click
or
to change its position.
6. In > options, select the check box Enable separated reference designators for fractured components in BOM to generate a Schematic Bill of Materials without merging reference designators for fractured components.
7. Click OK. The options are saved.