Creo View ECAD Adapters Guide > Publishing Design Files > Server-Controlled Publishing > Configuring the Cadence Allegro Design Entry HDL Worker on the Windchill Server for Linux > Configuring the Worker Agent
Configuring the Worker Agent
Use these ECAD-specific settings to supplement the instructions in the topic Configuring a Worker on the Same Machine in the Windchill Help Center. In the Worker Configuration Wizard dialog box, specify the following information:
• On the Step:5 page, under Add Worker, specify these settings:
◦ Host—Name of the worker machine, for example ecad-070.ptcnet.ptc.com
◦ Data Type—CONCEPT
For the list of the supported data types, see Supported Data Types for MCAD, Document, and ECAD in the Windchill Help Center.
• On the Step:7 page, under Worker Execution Command, in the Execute command box, type the full path to the conceptworker.sh script created during the configuration of the Cadence Allegro Design Entry HDL adapter. For example, $creo_view_adapter/concept_setup/conceptworker.sh
After you click Apply, click Save File, and then click Return to Worker Agent Administration. Your worker appears in the Worker Agent Administration list.
For more information, see the topic Server-Side Publishing of ECAD Viewables in the Windchill Help Center.
You have now configured the worker. Continue to the next topic, Customizing the Worker Agent, to customize the configuration.