Creo View MCAD Adapters Guide
>
Configuring the Creo View Adapter for STL
>
Introduction to the Creo View Adapter for STL
>
Prerequisites for the Creo View Adapter for STL
Prerequisites for the Creo View Adapter for STL
Check the following items to ensure that your system is able to run the
Creo View
Adapter for STL:
•
The
Creo View
Adapter for STL must be supported on the operating system and meet the minimum requirements as shown in the
Creo View Adapters Software Matrix (Таблица программного обеспечения адаптеров Creo View)
.
•
Ensure that your operating system has adequate CPU and storage systems.
Parent topic
Introduction to the Creo View Adapter for STL
Этот сайт работает оптимально, только если разрешены сценарии JavaScript