Creo View MCAD Adapters Guide > Configuring the Creo View Adapter for IGES > Introduction to the Creo View Adapter for IGES > Prerequisites for the Creo View Adapter for IGES
Prerequisites for the Creo View Adapter for IGES
Check the following items to ensure that your system is able to run the Creo View Adapter for IGES:
• The Creo View Adapter for IGES must be supported on the operating system and meet the minimum requirements as shown in the Creo View Adapters Software Matrix (Таблица программного обеспечения адаптеров Creo View).
• Ensure that your operating system has adequate CPU and storage systems.
Parent topic 
Introduction to the Creo View Adapter for IGES