Using vrmlbatch
The operation of the Creo View Adapter for VRML involves utilizing a single command to publish CAD data.
The form of command line is as follows:
vrmlbatch [options] <cad_data>
A command line conversion has the following stages:
1. Open a command prompt and navigate to the directory containing the CAD data you want to convert.
For the purposes of this example, the directory is C:\\vrml_data\\.
2. Type in the vrmlbatch command, for example:
C:\ptc\vrml_setup\vrmlbatch -p output vrml_test.wrl
In this example, the command line can be broken down in order from left to right as follows:
a. The setup directory containing the adapter configuration, followed by the command to convert the data:
C:\ptc\vrml_setup\vrmlbatch
b. Option -p <output path> is shown as output. This is the name of the directory where the adapter places the converted data.
c. The VRML data to be converted is given as vrml_test.wrl.
3. Press ENTER and vrmlbatch is launched. When the command prompt returns, the conversion is completed.
|
|
vrmlbatch can publish more than one instance of CAD data at a time. To publish a list of CAD data, type all of the names on the command line, separated by spaces. Wildcards (asterisks *) can also be used, if the user is confident that the data returned will be correct.
|
4. You can now open the converted data output in Creo View.
This completes the procedure for converting VRML CAD data to Creo View format using command line publishing.
