Menu Locations for Publishing and Cross-Selecting

Configuring the ECAD Adapter and your ECAD tool for interactive publishing adds a Creo View menu to your ECAD application. For most applications, a Creo View menu appears on the main menu bar. In some applications, the commands for publishing and cross-selection are added to an existing menu. The next table contains the location and the menu path of the Creo View commands in each application.

ECAD Tool	Menu Location	Path for Publishing	Path for Cross-Selecting
Cadence Allegro PCB Designer	Main menu bar, between the Tools and Help menus	Creo View > Publish	Creo View > Cross-Select with Creo View
Cadence Allegro Design Entry HDL	Main menu bar, between the Window and Help menus	Creo View > Publish	Cross selection is not supported.
Cadence Allegro Design Entry Capture/Capture CIS	In the Accessories menu, on the main menu bar	Accessories > Creo View > Publish	Cross selection is not supported.
Cadence Allegro Package Designer Interactive Menu	Main menu bar, between the Tools and Help menus	Creo View > Publish	Creo View > Cross-Select with Creo View
Mentor Graphics DxDesigner	Main menu bar, between the Add and Format menus	Creo View > Publish	Creo View > Cross-Select to Creo View Creo View > Cross-Select from Creo View
Mentor Graphics Expedition Enterprise	Main menu bar, next to the Help menu	Creo View > Publish
Mentor Graphics PADS Professional	Main menu bar, next to the Help menu	Creo View > Publish
Zuken CR-5000 System Designer	In the lower data panel, Schematic Design Data [SD]	Right-click, and then choose Action > Publish to Creo View
Zuken CR-8000 Design Gateway	In the lower data panel, Schematic Design Data [DG]	Right-click, and then choose Action > Publish to Creo View
Zuken CR-5000 Board Designer	In the lower data panel, Print Circuit Board Data	Right-click, and then choose Action > Publish to Creo View
Zuken CR-8000 Design Force	On the Home ribbon, in the Arbitrary group.	Click Arbitrary Command. The Arbitrary Command dialog box opens. Under Tool List on the right, select Publish to Creo View, and then click OK.