Recipe Setting Name
|
Values
|
Description
|
Convert
|
Drawing Models
|
Publishes all model viewables (PVS structure and OL's) for assemblies and parts referenced by a drawing.
|
Skeletons
|
Converts skeleton parts.
|
|
Thick Cables
|
Converts cable viewables as solid viewables when turned on.
Converts cable viewables as Datum Curves when turned off.
See Publishing Creo Parametric Cabling Information for more information.
|
|
Invisible Layers
|
Converts invisible layers and associated entities. (Displays the dimensions attached to the Creo Parametric layers. Disable this setting to avoid an increase in file size and reduced usability).
|
|
Layer State
|
Turns on the conversion of the Layer visibility in the source data set. When turned off, all features, whether visible in the source data or not, are visible in Creo View.
|
|
Transparency
|
Enables conversion of the transparency state of the features in the source data. Enabled by default.
|
|
Quilt as Construction Geometry
|
Enables conversion of Quilts in the source data as Construction Geometry in Creo View.
|
|
Thick Pipelines
|
Creates solid pipelines as part of the assembly (default).
|
|
Planar Annotations
|
Geometric Tolerances
Surface Finishes
Notes
Reference Dimensions
Driving Dimensions
Symbols
Set Datum Tags
|
When Planar Annotations is turned on in Required Entities on the Basic tab, click these settings to select which types of Planar Annotations to convert from the source data.
|
Floating Annotations
|
Geometric Tolerances
Surface Finishes
Notes
Reference Dimensions
Driving Dimensions
|
When Floating Annotations is selected in Required Entities on the Basic tab, click these settings to select which types of annotations to convert from the source data.
|
Screen Annotations
|
Notes
Surface Finishes
Symbols
|
When Screen Annotations is selected in Required Entities on the Basic tab, click these settings to select which types of annotations to convert from the source data.
|
|
Author State settings are on the
> sub-tab in version 3.1 M010 and later. |