Using dwfbatch
You can use a single command line to operate the Creo View Adapter for DWF to publish CAD data. The form of command line is as follows:
dwfbatch [options] <cad_data>
A command line conversion has the following stages:
1. Open a command prompt and navigate to the directory containing the CAD data you want to convert.
For the purposes of this example, the directory is C:\\dwf_data\\.
2. Type in the dwfbatch command, for example:
C:\ptc\dwf_setup\dwfbatch -p output dwf_test.dwf
In this example, the command line can be broken down in order from left to right as follows:
a. The setup directory containing the adapter configuration, followed by the command to convert the data:
C:\ptc\dwf_setup\dwfbatch
b. Option -p <output path> is shown as output. This is the name of the directory where the adapter places the converted data.
c. The DWF data to be converted is given as dwf_test.dwf.
3. Press ENTER and dwfbatch is launched. When the conversion is completed, the command prompt returns.
|
You can publish more than one instance of CAD data at a time using dwfbatch. To publish a list of CAD data, type all of the names on the command line, separated by spaces. You can also use Wildcards (asterisks*) if you are confident that the data returned will be correct.
|
4. You can now open the converted data output in Creo View.
This completes the procedure for converting DWF CAD data to Creo View format using command line publishing.