Using inventorbatch
Use a single command line to operate the Creo View Adapter for Inventor to publish CAD data. The form of command line is as follows:
inventorbatch [options] <cad_data>
A command line conversion has the following stages:
1. Open a command prompt.
2. Type in the inventorbatch command, for example:
C:\PTC\creo_view_adapters\inventor_setup\inventorbatch -p C:\published_data C:\inventor_data\inventor_test.ipt
In this example, the command line can be broken down in order from left to right as follows:
a. The setup directory containing the adapter configuration, followed by the command to convert the data:
C:\ptc\inventor_setup\inventorbatch This is the batch file that runs the adapter.
b. Option -p <output path> is shown as output. This is the name of the directory where the adapter places the converted data.
c. The Inventor data to be converted is given as inventor_test.ipt.
3. Press ENTER and inventorbatch is launched. When the conversion is completed, the command prompt returns.
|
You can publish more than one instance of CAD data at a time using inventorbatch. To publish a list of CAD data, type all of the names on the command line, separated by spaces. You can also use Wildcards (asterisks*) if you are confident that the data returned will be correct.
|
4. You can now open the converted data output in Creo View.
This completes the procedure for converting Inventor CAD data to Creo View format using command line publishing.