Configuring the NVIDIA Hardware

Configuring Stereoscopic View > Configuring the NVIDIA Hardware

1. Click

, type nvidia and press ENTER. The NVIDIA Control Panel dialog box opens.

2. On the left, under Stereoscopic 3D, click Set up stereoscopic 3D. The Set Up Stereoscopic 3D opens.

3. Select Enable stereoscopic 3D.

4. Verify that Select when the display is in 3D mode is set to Always.

5. To avoid the flickering effect, verify that you are not using a multiplication of the frequency of your screen. For example, if your screen frequency is set to 50Hz, use 120 Hz.

For some 3D displays, you might need to use a specific resolution. For example, if you are using a 3D television set, you must set its resolution to 1080p, 1920*1080.