To Set Model-Explore Options
1. Click > . The Creo View Options dialog box opens.
2. Next to Showing, click Active View or Defaults. The relevant options list appears on the left.
3. On the left, select Model. The Model - Main options open.
4. Verify that under Navigation, the Explore option is selected.
5. On the left, under Model, select Explore. The Model - Explore options open.
6. Set the fly Speed of the model.
7. Select an axis for the Up direction.
8. Select an option for the spin center:
◦ Use last selected part for spin center—the spin center is set to be the last part you selected.
◦ Enable regular spin center—you can define the spin center under > .
9. Click Apply to apply the options and keep the Creo View Options dialog box open, or click OK to apply the options and close the dialog box.