To Set Design Check Options
1. Click > .
The Creo View Options dialog box opens.
2. On the left, under Model, click Design Check. The Model-Design Check options open.
3. To show warnings before deleting Design Check items, select one or both of the following check boxes:
◦ Show warning before deleting a tag note
◦ Show warning before deleting an entire tag
4. To display parts, geometry, Model Annotations, or all three in a neutral color in Design Check mode, do the following operations:
a. Next to Showing, select Active View.
b. On the left, under Model, select Design Check. The Model-Design Check options open.
c. Under Initial State, select or clear the check boxes for either or both of the following options:
▪ Geometry Color
▪ Model Annotation Color
▪ Markup Color
d. Click the color button for the item to define. The Choose Color dialog box opens.
e. Set a color, and then click OK.
f. To set a neutral color for the other item, repeat steps d-f.
5. Click Apply to apply the options and keep the Creo View Options dialog box open, or click OK to apply the options and close the dialog box.