To Set Model Filters
1. Click > . The Creo Illustrate Options dialog box opens.
2. Next to Showing, select Illustration.
3. On the left select > . The Model-Filters options open.
4. To enable or disable display options, select or clear the check boxes below:
◦ For Model Geometry:
▪ Solids
▪ Surfaces
▪ Cosmetics
◦ For Creo Illustrate Annotations:
▪ Explode Lines
▪ Callouts
▪ Stamps
◦ For Model Construction Geometry:
▪ Surfaces
▪ Cosmetics
▪ Datum Planes
▪ Select the Tags check box to display the Datum Plane tag.
▪ Datum Curves
▪ Datum Axes
▪ Select the Tags check box to display the Datum Axes tag.
▪ Datum Points
▪ Select the Tags check box to display the Datum Points tag.
▪ Coordinate Systems
▪ Select the Tags check box to display the Coordinate Systems tag.
◦ For Model Annotations:
▪ Planar Annotations
▪ Floating Annotations
▪ Misc Annotations
▪ Screen Annotations
5. Click Apply to apply the filters and keep the Creo Illustrate Options dialog box open, or click OK to apply the settings and close the dialog box.